Replacing Axle Seal On Sammy

[jeff cardall]

CAN ANYBODY TELL ME HOW HARD IT IS TO REPLACE A REAR AXLE SEAL AND BEARING ON A SAMMY NEVER DONE IT BEFORE

 

[spencurai]

semi hard. you need a new bearing, seal, and bearing retainer. you have to cut off the old retainer and remove the bearing, then press on the new bearing and then retainer. the seal is just inside the axle housing and they go out regularly.

here is a good write up on the how to
http://www.off-road.com/suzuki/tech/rearaxlebrg.htm