xj_punk said:fyi, i am not sure if this applies to tj's but i have heard and seen pics of a lot of people breaking the first gen xj la's
you probably already know that, being that you are an xj guy as well, but i thought i'd warn you anyway
HA HA VERY FUNNY!!!Hickey said:Here we go again...
1BadZJ said:What kind of pictures are you looking for? I don't have any close up pictures of the TJ. I have a buddy who runs the gen 1 and beets the hell out of it and it never brakes. The gen II has more flex. Scott Creasey has TJs with the Gen 1 and Gen II on it.
Hickey said:Here we go again...
Hickey said:Here we go again...
1BadZJ said:let me see if I can get some pictures to help you out.
Well on my gen 1 kit they had two brackets that would go between your factory tansfercase skid and frame. The brackets had holes in em so you could just bolt it right up in there and then after bolting you could weld along the sides. You'd need to cut your stock lower mounts off your frame like greg did in his write up for his long arm kit. Just gusset the **** outta that drivers side axle bracket.Badcop said:looking for the mounting to the frame.
Ken said:Well on my gen 1 kit they had two brackets that would go between your factory tansfercase skid and frame. The brackets had holes in em so you could just bolt it right up in there and then after bolting you could weld along the sides. You'd need to cut your stock lower mounts off your frame like greg did in his write up for his long arm kit. Just gusset the **** outta that drivers side axle bracket.
Find someone that has em and measure up then make em yourself or go all out with some fab job like you're talking.
Well after the RK arms ripped off my entire spring bucket and LCA bracket from the axle....I got some custom arms built....The single radius going to the stock location was a HUGE improvement.rockkrawler said:THe frame brackets are RK but those arms arent. What are they??
I'm at work right now and they block photobucket, so I can't go find a pic right now...I think you could find one of you go through that link I posted....If not I'll post some up when I get off.Badcop said:James - thats exactly what I needed, It is very similar to those, is the rear lower arms mounted the same as the front?