Safety inspections

[DewYota]

I know this is a widely talked about subject and some people get all tense but i want to pass safety but i dont know what i all need. right now i have a sway bar on the front of my truck thats just sitting there not bolted on, and also my track bar is also just sitting there not bolted on because of lack of length, will my 4runner pass safety like this, should i take them off? make them work or what are you guys doing? i know most are running with out the sway bar but is that legal. dont know to much about this and was just wondering since the tabs expire this month

also are e-brakes required to be functional??
thanks again

 

[gijohn40]

check this site out for the 2007 safety manual and it explains everything...

http://safetyinspections.utah.gov/pdf/2007 SI PLT Manual.pdf

 

[74highboy]

parking brake has to work ive been failed for not having my sway bars hooked up not sure on the trac bar but if i was still inspecting i would probly fail it

 

[myota]

IMO if you're daily driving your Toy connect those bars up pronto!!!! Brake dive is scary and really dangerous. Upgrade to x-over steering if you have at least 3" lift (min. needed for x-over on TOY)