broncomitch
dont be a sheep in a jeep
- Location
- west jordan,UT
scout II powersteering box with pump & ect
I have decided to go full hydro so need to sell this for part's.
i had it rebuilt in 2009 and it's still nice and tight, no slop or leak's.
it has the smaller shaft (will get spline count later) and a jeep steering shaft fit's perfect on the shaft. (shown)
i cut the jeep shaft and welded it to my bronco steering shaft and it worked like a charm. (i have a spare jeep steering shaft i can throw in for a extra $20)
it's was mounted on my EB and LOVE the turning power it has and wish i could save it for my next bronco.
the pitman arm is a stock bronco arm the has been bent strait and drilled for a 3/4'' bolt,
the pump is a few years old but was still working grate when i pulled it, bracket is off a 351M but i had it on my 302 and then my 351w and comes with the hose and fitting's and bracket i made.
everything i used as my powersteering is there and like i said, it worked really well and could turn my 39'' tsl's with no problem.
$100 for the box&arm
$130 for everything
$20 for jeep steering shaft
old pic's
pic's of bracket on 351w (302 was use's the top hole.)
http://i649.photobucket.com/albums/uu217/broncomitch/351w-2.jpg
jeep shaft,
I have decided to go full hydro so need to sell this for part's.
i had it rebuilt in 2009 and it's still nice and tight, no slop or leak's.
it has the smaller shaft (will get spline count later) and a jeep steering shaft fit's perfect on the shaft. (shown)
i cut the jeep shaft and welded it to my bronco steering shaft and it worked like a charm. (i have a spare jeep steering shaft i can throw in for a extra $20)
it's was mounted on my EB and LOVE the turning power it has and wish i could save it for my next bronco.
the pitman arm is a stock bronco arm the has been bent strait and drilled for a 3/4'' bolt,
the pump is a few years old but was still working grate when i pulled it, bracket is off a 351M but i had it on my 302 and then my 351w and comes with the hose and fitting's and bracket i made.
everything i used as my powersteering is there and like i said, it worked really well and could turn my 39'' tsl's with no problem.
$100 for the box&arm
$130 for everything
$20 for jeep steering shaft
old pic's
pic's of bracket on 351w (302 was use's the top hole.)
http://i649.photobucket.com/albums/uu217/broncomitch/351w-2.jpg
jeep shaft,
