Shackle flip

[hoosier]

Does any have or know where I might be able to find either the blue prints or measurements for a shackle flip kit for a suburban.

 

[skippy]

Why not just build one to your own specs? Who cares how everybody else is making them

 

[hoosier]

You just need to stop making sense. That's not how i do things ;-)

 

[Tacoma]

You could come take measurments off mine. Gawd, Jeremy. *sigh :facepalm: :smh:

 

[mombobuggy]

If you have a parts truck you could use the brackets from the front of the rear springs.

 

[Tonkaman]

If you have a parts truck you could use the brackets from the front of the rear springs.

That's how I did it on my old silverado. If I recall right, they were dirt cheap from the dealer too. If not look at LMC

 

[NYCEGUY01]

I always just cut out the bottom of the stock bracket and flipped the shackle out the bottom.
Then add a little reinforcement to the top of the bracket.

 

[hoosier]

Thanks for all the help. I have looked at some. I am going to kinda run the Ord ones except i need to change the design a little bit so i can run 56s. I cant move them back due to the lack of frame