Shaving A 14 Bolt

[hammer74]

Does anyone know who can shave a 14 Bolt?
Thanks

 

[suv]

Here is a writeup on how to do it. I'm sure most of the shops around would be able to do it if you're not up to the task.

 

[Shawn]

http://www.rockymountainextreme.com/showthread.php?t=1378&highlight=shave

 

[harkinoff]

http://www.rockymountainextreme.com/showthread.php?t=1378&highlight=shave

instead of coming over to your house that day and using the Porta-band on your 14 bolt, I should of cut mine instead, mine is still not finished on the lip

 

[gtidrivr]

There has been alot of talk on PBB lately about using a skil saw witha metal blade on it... The guys using it says it the jammy!!

 

[Caleb]

There has been alot of talk on PBB lately about using a skil saw witha metal blade on it... The guys using it says it the jammy!!

I heard abou that a long itme ago...also by doing it this way you can set the skill saw to the proper angle...although you often have to finish the cut with a sawzall (not if you are only cutting off the lip though) I have only found one blade anywhere that is a 7" blade that is made to cut steel...they are kinda hard to find...

 

[VANDALL]

Just grind the FU*K out of it, That is all U need to do.............
U can grind about an inch off of it .......
I did it to mine...........


VANDALL.

 

[suv]

I heard abou that a long itme ago...also by doing it this way you can set the skill saw to the proper angle...although you often have to finish the cut with a sawzall (not if you are only cutting off the lip though) I have only found one blade anywhere that is a 7" blade that is made to cut steel...they are kinda hard to find...

The blades are pretty easy to find at Home Depot. I've never used one on a skil saw, but have done it on my 10" table saw a bunch of times with excellent results (like when I cut some compound angles for my square-tube sliders).

 

[jcruiser70]

Sawzall or grind it off, all it takes is time.