Shortened FZJ80 axle

C

cruiserpoor

New Member
I have a 1994 FZJ80 land cruiser rear axle that has been shortened 7 inches. The diff is now centered and the wheel mount is around 55" which is the same as an fj40 or older 4runner. It is full float with disk brakes and uses 2 stock 80 axle shafts (short side obviously). The hubs and dust plates have been sandblasted, primed, and painted black. The rest of the axle is bare metal with most brackets cut off and ground down. Wheel bearings have been thoroughly cleaned and repacked. Has a new diff gasket and inner and outer hub seals. Stock 4:10 gearing with an ARB air locker. Needs new rotors and calipers but I have the old ones for cores. This would be an awesome upgrade for a 4runner or pickup. This was going to go in my fj40 behind an atlas but have decided to go 1ton. Asking $850. I am open to trades for 1ton parts such as gears and lockers for a high pinion 60 or 14bolt.
There is not much to see, but if anyone MUST see pics then I can take some. Located in Provo.
Thanks.
 
Last edited:
Yes, it really is true. It is a really cool axle and I really don't want to get rid of it. Gathering the parts to duplicate it wouldn't be easy, plus the machine work. I am not going to have anything to put it under for a long time so it may as well be put to good use. I know there is a million mini truck guys out there that would like a cool Toyota upgrade!!
 
You must log in or register to reply here.
Back
Top