Show Us Your PROJECTS!

zmotorsports

Hardcore Gearhead
Vendor
Location
West Haven, UT
That looks like a HELL of a lot of work. Turned out great.

Carpenter I am NOT. I can work with metal but I do not care for carpentry in the least, although I can definitely respect the skills.

Mike
 

RogueJeepr

Here!
Location
Utah
Pike ;
Wanna come do some drywall for me ?
Or teach me. [emoji3]
It looks great though.

Sent from my H1611 using Tapatalk
 
Last edited:

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
This is my carport i built in the spring of 17. I have added shelving and a air compressor dungeon over the length of time until now. Right now i have a kid diggging it down a few inches, then im going to have gravel hauled in. There is a beatiful cobble stone sidewalk that exits the side of the shop that i dont want to hide. The crazy old guy that hangs out around my shop calls it the Tree port because the large apricote tree infront of it hides most of it from the street and gives it a nice secluded feel in the summer time.

The whole thing is made out of 2 7/8" and 2 3/8" Drill stem pipe. I made the main front truss stong enough to hoist off of. The 2x4s that the roof is screwed to are close enough for me (275lbs) to walk any where on and not damage the tin roof. Its 24' Deep and 25' wide with a 11' peak down to 8' in the back. There are 20 poles cemented into the ground, most are for shelving. Its built right up to the property line, If i had had another 30" of property i would of built it another 30'. Its just big enough to park both my buggys and 4wheeler in. If the tree ever dies i may extend it forward toward the street 15'.

IMG_3520.JPGIMG_3521.JPGIMG_3522.JPGIMG_3523.JPGIMG_3524.JPGIMG_3528.JPGIMG_3529.JPGIMG_3527.JPG
 
Last edited:

comingdown

Active Member
Location
Orem, UT
Finished a remodel few months back of a house I moved out of to rent out.
 

Attachments

  • IMG_0462.JPG
    IMG_0462.JPG
    569.2 KB · Views: 12
  • IMG_0463.JPG
    IMG_0463.JPG
    572.3 KB · Views: 12
  • IMG_0464.JPG
    IMG_0464.JPG
    688.9 KB · Views: 12
  • IMG_0468.JPG
    IMG_0468.JPG
    747.3 KB · Views: 12
  • IMG_0476.JPG
    IMG_0476.JPG
    664.1 KB · Views: 12
  • IMG_0469.JPG
    IMG_0469.JPG
    584.3 KB · Views: 11
  • IMG_0488.JPG
    IMG_0488.JPG
    872.5 KB · Views: 11
  • IMG_0489.JPG
    IMG_0489.JPG
    775.6 KB · Views: 9
  • IMG_0543.JPG
    IMG_0543.JPG
    877.1 KB · Views: 9
  • IMG_0544.JPG
    IMG_0544.JPG
    919.4 KB · Views: 9

comingdown

Active Member
Location
Orem, UT
And here it is mostly finished. Just did the main floor, left the upstairs and basement how they were.
 

Attachments

  • IMG_0708.JPG
    IMG_0708.JPG
    860.5 KB · Views: 15
  • IMG_0709.JPG
    IMG_0709.JPG
    705.9 KB · Views: 15
  • IMG_0712.JPG
    IMG_0712.JPG
    624.6 KB · Views: 15
  • IMG_0713.JPG
    IMG_0713.JPG
    552.1 KB · Views: 13
  • IMG_0715.JPG
    IMG_0715.JPG
    585.4 KB · Views: 12
  • IMG_0718.JPG
    IMG_0718.JPG
    611.4 KB · Views: 13
  • IMG_0719.JPG
    IMG_0719.JPG
    472.7 KB · Views: 13
  • IMG_0720.JPG
    IMG_0720.JPG
    592.3 KB · Views: 13
  • IMG_0962.JPG
    IMG_0962.JPG
    925.2 KB · Views: 13
Top