Big John
Registered User
- Location
- Dove Creek Colorado
I just bought a new raised steering arm for my blazer but Iam haveing problems removing the old one. I was wondering what the trick is to takeing the dang thing off? Thanks. 
Steering Arm
- Thread starter Big John
- Start date
- Location
- Grantsville, Utah
BHF!! loosen all the nuts but leave them on the end of the studs to protect, and hit that momma on the side of the old steering arm where it meets the knuckle. do you have a sledge hammer?
Big John
Registered User
- Location
- Dove Creek Colorado
do you mean to just beat the studs out?
- Location
- Grantsville, Utah
no, the studs stay, you have to hit the arm itself on the side, and then you will see the conical washers start to work out.
Vonski
nothing to see here...
- Location
- Payson, Utah
and if that doesn't work, you could use a BFH...
Brett
Meat-Hippy
- Location
- Salt Lake City Utah
Originally posted by Vonski
and if that doesn't work, you could use a BFH...
werd
K85k03
Registered User
- Location
- Dove Creek, Colorado
Well the BHF didn't work but the BFH worked wonderfully, I mean I only had to swing for about 10 mins. I hate rust. Thanks for the help guys.
