The LJ I have always wanted

I have been starting and mostly stopping builds on my Jeeps for years and years, this has always been my dream. I had a YJ that changed build direction so many times that I need to start fresh and just install the parts I have been acquiring. So here she is my "about time" build. I started with an LJ, requirements to buy were Auto, Hard top and working AC. I wanted to try and get my wife to go with me again. I found this one, it had a Teraflex LCG Enduro kit with 35" tires, bumpers that were just not my style and a few little issues that I had worked out. the first time I went to head up the canyon to test her out the transmission went into Limp mode. Not the best way to start. So it sat around for 4 months. Then the adventure began. I had to get a new TCM and I worked out many of the little bugs. Then I loaded it up on the trailer and took it to MOAB. It has evolved rather quickly since. I debated between an LJ and a 4 dr JK for a little while and I am very happy with my decision. This has turned to be EVERYTHING I have ever wanted and more. It has tested my build skillz

Owners Name & City-
Matt in Lindon, UT

Make, Model & Year of Vehicle-
2005 Jeep TJ Unlimited - but seriously its an LJ

Engine-
4.0 throttle body spacer and a chopped Air tube

Transmission-
42RE

T-Case-

Atlas II 3.8

Axles-
Front - King Pin D60 narrowed 4" Solid Axle knuckles out 35 spline Outers ARB 5.38's the ARB is actually new old style RD-35
Rear - Dynatrac ProRock 60, Warn Full Float kit (yep from back in the day) Dutchman Double spline shafts kicked up a bit Yukon Zip Locker with 5.38 Gears

Suspension-
3 Link front Long Arm using Artec Frame brackets and #inartecwetruss
Triangulated upper 4 Link Long Arm Rear
Falcon Shocks - TJ Front (for now) 2 dr JL 3.3 fast adjust with SP2 in custom (Carl built) Shock Towers
Teraflex Speed Bumps ( might be the best mod I have done for Ride quality

Wheels and Tires-
Trailready HD17 Wheels 5x5.5" bolt pattern
BF Goodrich 39 x 13.50 KM3's stick to the rocks so nice

Winch-
Warn Zeon 10 with Synthetic Rope and Factor 55 Splicer

Favorite Trails-
Moab is my happy place its been on everything from Chicken Corners to Pritchett, Learning how fun Sand Hollow can be.

Other-
Poison Spyder Hi Line Fenders, Artec Corners, Swag Rear Bumper, Custom Front Aluminum stubby bumper, PSC Hood Louvre, Teraflex Gas Tank Skid TNT Sliders (at the moment) Double DIN Radio with Car Play

What it looked like when I bought it more or less
IMG_0042.JPGIMG_0007.JPG

Next step
IMG_0596.jpg
Current
lots_HDR_flexy.jpgFlexed_Crack.jpgnose down no left.jpg
 

UPNO4

Addicted
Location
Lindon, Ut
Getting things cleaned up and checking clearances

Holding up the coil overs to get an idea if things wil sit where I want
IMG_0404.jpeg


Relocating the track bar frame side actually have more clearance now I think
close_but_clears.jpeg

1/4" should be enough right?
IMG_0407.jpeg

Bumps look like they will just fit

coilover_bump.jpeg

I think I will move the Axle side Track Bar mount over more to clean up the angle a little more
trackbar_draglink.jpeg
 
Top