The Mushroom Factory

Status
Not open for further replies.

Cody

Random Quote Generator
Supporting Member
Location
Gastown
In related news, a federal investigation of GM is underway in response to allegations that they have knowingly been manufacturing vehicles for 102 years that are not running off of whogivesadamnatall--a substance engineered and distributed solely by T-case Terry that replaces gasoline. While no quantifiable data, real world experience, or expert testimony is available to support claims that this substance was always intended to be used by GM and is, in some unknown and unsupportable way, a better alternative to gasoline T-case Terry has his sites set straight on the top. T-case Terry had this to say about his claims

"Dem boys down dar at GM, dey done knew that this stuff would be around. Billy Durant, (founder of GM) knew my great grand dad and had it out for him. They done conspired against my family and went ahead and used this gasoline stuff even do they done knew that Whogivesadamnatall was a better fuel. I can't prove it's better, but it sure is better for me if everyone would buy it instead of gas so I can make money"
 

rholbrook

Well-Known Member
Location
Kaysville, Ut
You know if I was to come out of the closet and I'm not saying I will or won't, I still wouldn't go around calling myself "Tranny Frank" for fear of a good ass whoopin. What I wear on casual Fridays is my own business but I guess Frank likes to advertise his/her superior dressing skills
 

jdub

Scrambler
Location
Provo, Utah.
How did anyone get anything from that drivel? If there was any point to be made, proper grammar would be essential. Oh, and drop the crappy metaphor/simile stuff please!
 

redXJ

Thats what she said
Location
KEARNS
Don't Google "Tranny Frank" :eek:

conspiracy.jpg
 

GOAT

Back from the beyond
Location
Roanoke, VA
A Mushroom Factory, is a place where you are kept in the dark and fed bullshit.

This is what is going on at IH8mud, I recently posted about the misconceptions about the enclosed steering knuckle, the thread has been since been sucked into this factory and deleted,

There are individuals that when a question comes up on this subject put out mis leading information, propaganda

This mis information is being piped out of none other than the Toyota university. There are 6 or 7 thing about the design that I have proven beyond any doubt that I was told by these folks with BS degrees, either flat out did not exist or were not possible, One of the fist things they will tell you is that there is a spindle seal,
Longfield if you are agreeing with this you are part of the problem not the solution

I have been in contact with the editors of the TLCA ,Todd there seems to see the situation for what it is . Robbie however is stuck in this pathetic place, spoon fed propaganda.

I dont care if you what you think of me, I am attempting to kick in this door and shed some light on the situation, I do not think that woody at IH*MUD is aware of the situation,
Kurt Williams and I are on much better terms than when we first met, he has stated that either way he will sell parts, If what I have found is the shit for you knuckle he will sell parts just the same,
Longfield I need your help, you know full well the is no spindle seal, I need some one in these Toyota circles that has some clout to fight this very effective machine,
I will put you in touch with those in the Spokane and North Id area that have helped me thu this past year researching this subject.

Thanks Frank





idaho



i also believe a psychedelic experience brought on by the ingestion of psilocybin mushrooms would do this individual well :p
 
Last edited by a moderator:

Tacoma

Et incurventur ante non
Location
far enough away
I read your article, and once again, this is nothing new, endemic issue to ALL closed knuckle axles. The solution is: better axle seals. Kurt recommends Marlin's, and comparing the two I agree with that recommendation. The rest is maintenance issues AFAIC.

Keep up the good fight though, you're a real boon to the community. :cody:
 

GOAT

Back from the beyond
Location
Roanoke, VA
far be it from me to come across as flippant, but who gives a fawk about toyota axles?



mods, please dont lock this thread as it could potentially restore some of the e-excitement RME has been been missing:rofl:
 

Jinx

when in doubt, upgrade!
Location
So Jordan, Utah

The best part of this is tranny boy frank thinks he is changing the world here with his info. I personally don't care about his blah blah blah. But I do find it hilarious that he is calling Kurt out on here. I will personally back up Kurt anytime.

Funny he has to post another forum link because he doesn't have the balls to post up here with any thing that matters.

I second what Shawn said. Go away.
 

Kevin B.

Not often wrong. Never quite right.
Moderator
Location
Stinkwater
Could be wrong, but I believe he's asking Kurt for support, not calling him out. In the other thread, somebody conflated Frank and Kurt, which is why Frank is referencing it.

Dunno. Frank seems weird. But I don't think he's trying to pick a fight.
 

Tacoma

Et incurventur ante non
Location
far enough away
Yeah, he is. He's picked a fight with The Establishment, and it won't matter to him how irritating it might be-- because that means we're all snowed the way the OEM's, the forums, and the lube gurus have engineered us to be. I mean, for crying out loud! The Toyota TSM lists the wrong grease!!!!

Oddly, this issue does not exist for say, M715 owners, who face the same design issues. Somehow, they are able to deal with the issue. Is there some awesome factory lube that exists? Maybe, but so what. I have yet to meet anyone that considers it the critical issue that Frank does. The debate usually ends up "Gear oil or grease?" since the books spec both, OBVIOUSLY erroneously.

At any rate, I find his Quixotic presentation of what he obviously feels strongly about somewhat less than convincing. Maybe he has a point, but this hit-and-run posting does nothing to further his cause, however.. mislaid it may be. *shrug
 

4554x4

always modifing something
Location
Sandy Utah
Studly Kurt!

I'm not sure how Kurts involved here, but I will say this about Kurt. If it pertains to a Toyota and i'm not sure myself, I can count on Kurt to tell me straight, get me the right part, and even have his wife deliver the part on her own time. Thanks Kurt, Kurts wife and Cruiseroutfitters!
 

cruiseroutfit

Cruizah!
Moderator
Vendor
Location
Sandy, Ut
LOL, Kurt has zero involvement.

Frank, my position is still the same. Rebuild a handful of axles using your product and give us updates in 1k, 5k and 50k miles. Your going to prove your product on results not by telling everyone they have been mislead by Toyota's own engineers for the last 50 years.

I've yet to see your product in use so it would be naive and un-ethical for me to claim its the answer to leaky knuckles. Compare that to the hundreds of axles I've seen sucsessfully rebuilt using Toyota's protocol (FSM methods) and you'll see why we need some test results from rebuilt axles, not just comparisons to non-Toyota axles, etc.

Show us some 50k mile test results with acceptable leakage and I would be all over selling your product as I am with any other new product that yields satisfactory results for my customers.
 
Status
Not open for further replies.
Top