Toyota leaf spring brackets/perches?

[B2-Bomber]

Toyota uses a 60mm wide leaf spring, which is pretty much 2-3/8"

I was hoping to buy some universal spring brackets for the frame . And maybe some perches for the axle

But everything i can find is 2-1/2".

Ideas?

 

[thenag]

My brother in law is looking at stuff for an fj40.

These say 3 3/16
http://www.ruffstuffspecialties.com/catalog/FJ60-HANG.html

(also listed as XJ hanger?)

The guys at ruff stuff are super cool so maybe just a call to them could verify the size?

Nathan

 

[iamsparticus]

you dont just measure the width of the spring you have 1/4 inch if bushing on each side, so the ones trail-gear, ruff stuff, and mid night 4x4 sell work just great

 

[B2-Bomber]

you are saying that the outside width of the bushing is supposed to be the same as the outside width of the 2-1/2" bushings?

I swear when I measured them both, the 'yota bushing was about 1/4" narrower than my chevy springs were are the bushing