`toyota t-case

[quinnhussey]

i have a sami with a 4.3 in it and a turbo 350 and a sami t-case with 4.16 and i just saw today that my t-case is splitting in half. its been the week point for a a while and i want to change it out with something better but not something huge. does any one no if toyato makes a divorced t-case, and if lows gears are made for those cases?

 

[billylight]

they dont have a divorced case but adapting from your th350 to a toy top shifter is only an adapter away. there are a variety of gear sets available and always the option of doing dual cases

 

[zukking01]

I had a 4.3/ 700r4 and np205 in my zuk. It fits between the frame rails, tight, but fits with 1/2-1" on each side.

I have my np205 with heavy duty bearing that I pulled out and fits on a th350 if you are interested.

 

[NOTATOY]

You can do 4.7's in a toy cases, do the stocks in the crawl box, and 4.7 in rear gives you a 10.7-1 double low. If you keep the sami case you can go to 6.5-1 TG gears

 

[Rot Box]

This will allow for a divorced case http://www.ottindustries.com/divorcetoyota.htm , but like stated above you'd be better off bolting it to the th350. You can get up to 5.0:1 gears for the toyota gear drive cases.

 

[quinnhussey]

tthanks every body, i'm goin to set an np 205 and change the axles gears. and later do the t-case gears.