wanted......mostly junk fuel pump

ChestonScout

opinions are like Jeeps..
Location
Clinton, Ut
Does anyone have a fuel pump kicking around that may still work, just not enough pressure to run your motor?


I need to empty out one of my semi truck fuel tanks into the other one. At least 90 gallons in there so siphoning into a 5 gallon can is just taking to long.


Anyone??


it will have to be an inline obviously.


Thanks! :D
 
Take your air blower nozzle and cover your tank hole with your hand and pressurize the tank and it will push the fuel to the other tank unless your crossover is plugged . Are you taking a tank off ? And if your cross over is plunged just a piece of garden hose from one tank to the other .. 2 people makes this easier butt can be done alone
 
Last edited:

benjy

Rarely wrenches
Supporting Member
Location
Moab
I have a working e2000 if you're in ut county you can pick it up anytime
 

ChestonScout

opinions are like Jeeps..
Location
Clinton, Ut
I tried the air trick already and didnt have any luck. Hose isnt plugged.


I just ended up undoing the hose and filling a can while I was messing with other stuff. Did about 60 gallon worth tonight. Wasnt to bad. I think I will just keep doing this until it is low enough that I can take the tank off.


Thanks for the offer Benjy!
 

bryson

RME Resident Ninja
Supporting Member
Location
West Jordan
I have an working Ford Contour pump you're welcome to... I was told to replace it so I did. Needless to say, it wasn't the problem. It was an in-tank pump, but IIRC, it has provisions for hoses on both ends.
 
Top