General Tech What did you work on Today?

[frieed]

The shed is now in place-


and gratuitous pic of my nifty yard tool holder-

 

[Coco]

Coco don't you have some horns to weld on something? ‍

Haha, not til I build my next chassis.

 

[Spork]

In the middle of it... Bought a new bumper. when I went to put it on I found this, guess I'm going from a simple bolt on to a how's my welding today project.

 

[I Lean]

In the middle of it... Bought a new bumper. when I went to put it on I found this, guess I'm going from a simple bolt on to a how's my welding today project.

I wanted to "dislike" that photo for you. Did you get hit at some point? (or hit something...I can't tell if it's a front or rear from here, but there is a skidplate on the ground that might mean it's a front...)

 

[frieed]

In the middle of it... Bought a new bumper. when I went to put it on I found this, guess I'm going from a simple bolt on to a how's my welding today project.

View attachment 113993

I but you could pull that flat. a couple of 1/4" plates with holes, one inside the frame and one outside. throw a couple bolts in there and break out the impact gun.

 

[Spork]

I wanted to "dislike" that photo for you. Did you get hit at some point? (or hit something...I can't tell if it's a front or rear from here, but there is a skidplate on the ground that might mean it's a front...)

It is front passenger side, I never got hit but it was missing the tow point so maybe previous owner did.

 

[Spork]

I but you could pull that flat. a couple of 1/4" plates with holes, one inside the frame and one outside. throw a couple bolts in there and break out the impact gun.

That sounds like a better idea than what I did, I ended up cutting it and welding a plate back in. My captive nuts are off a little so fighting that.

 

[frieed]

.... My captive nuts are off a little so fighting that.

I hate it when that happens

 

[frieed]

Making steel wheels for my TIG cart
https://www.rme4x4.com/threads/making-steel-wheels-for-my-tig-cart.114822/

 

[BlueWolfFab]

Made a decent sized custom driveway for a customer in Midway. Granted; while I've personally done hundreds, if not thousands of projects similar to this one, it was the first big project I've done since I broke off from my previous employer and started my own paving company. All in all I'm very happy with how it turned out.

 

[mbryson]

Hmmmmm.... I hope I need to build a culdesac soon. Interested?

 

[BlueWolfFab]

Hmmmmm.... I hope I need to build a culdesac soon. Interested?

Fo' sho' 801-420-6205

 

[mbryson]

Fo' sho' 801-420-6205

I still need to figure out if we’re buying the property. (Also a good off roading or muscle car neighbor to buy/build on the lot across the street from me in Bountiful .) Good to know someone that can do the work though. Should know in the next 45-60 days?

 

[Bart]

Great work.

 

[N8RB8R]

Got my rear upside down Falcon shocks installed and trimmed front Poison Spyder fenders to work. Turned out well and these shocks are fantastic!

 

[Greg]

Got my rear upside down Falcon shocks installed and trimmed front Poison Spyder fenders to work. Turned out well and these shocks are fantastic!

What did it take to put the rears on upside down?

 

[N8RB8R]

Delete the factory rear muffler and install new one mid ship. Relocated the sway bar back 1.5”. Trimmed the upper shock mounts to clear the reservoir and adjuster, it may not have been needed but I did weld a lip back into where I trimmed the mounts . Really wasn’t too much work and it is nice to have everything up out of the way.

 

[YROC FAB.]

I made a chip pan for my lathe. This particular lathe comes in 4 bed lengths. Mine is the longest and they did not come with one with this length. I tried to make look oemish.

 

[YROC FAB.]

Really sharp work!

Thank you sir. The plasma table life is easy.

 

[XJEEPER]

I completed this 4.5 x 8 trailer remodel a few weeks ago and it turned out so nice that my neighbor came over and purchased it from me as I was wrapping it up.