anderson750
I'm working on it Rose
- Location
- Price, Utah
Never doubt your elders
What do I get for the next bike?
- Thread starter Gravy
- Start date
anderson750
I'm working on it Rose
- Location
- Price, Utah
The mail man delivered these beutiful works of art from Pro Carbon. With shipping from the UK, they were still slightly less than buying P3 and are multi layer carbon fiber and not a fiberglass base with a single CF layer over it. The brackets for the pipe also make it stand off so it does not burn.
rholbrook
Well-Known Member
- Location
- Kaysville, Ut
You happy with those so far? I like the pipe separation idea. Mine can get smelly.
- Location
- The Land Northward (Bountiful), Utah
Some said, "Run an Enduro Engineering spark arrestor cap," well... I've had 2 friends not finish races or rides because their screen clogged up so I was determined to do it "the right way."
After two incorrect parts sent and way too much time looking for part numbers. I've finally got a spark arrestor silencer!
FMF Turbine Core 2.1 "KTM/Husqvarna Edition."
(I don't think the normal 2.1 actually exists yet so I get to pay more for an anodized black AL can and stainless tubing).
The tone is much deeper and ever so slightly quieter. And so nice looking!
The part number is 55505979004 for those looking.
After two incorrect parts sent and way too much time looking for part numbers. I've finally got a spark arrestor silencer!
FMF Turbine Core 2.1 "KTM/Husqvarna Edition."
(I don't think the normal 2.1 actually exists yet so I get to pay more for an anodized black AL can and stainless tubing).
The tone is much deeper and ever so slightly quieter. And so nice looking!
The part number is 55505979004 for those looking.
anderson750
I'm working on it Rose
- Location
- Price, Utah
They look pretty. Have not ridden the bike yet. Jack rides the bike more than I do.
- Location
- The Land Northward (Bountiful), Utah
Ooosh Dirt Tricks Chromatic.
Last edited:
anderson750
I'm working on it Rose
- Location
- Price, Utah
That thing will last forever.
Tonkaman
Well-Known Member
- Location
- West Jordan
Ive been loving mine
- Location
- The Land Northward (Bountiful), Utah
SOLD
That 2015 was a fantastic bike.
That 2015 was a fantastic bike.
ChestonScout
opinions are like Jeeps..
- Location
- Clinton, Ut
Dang....was thinking of texting you today to see if it was still around.
- Location
- The Land Northward (Bountiful), Utah
Weird thing. I never put up any ads. I just had 3 friends come by today and we were hanging out and the one test rode it and he says, "I've got to have it," so he took it home right then.
He bought Chris's old WR250f from me like 3 years ago too and was just looking to upgrade I guess.
He's selling his WR to one of the other friends that was over also so almost everyone got new bikes LOL.
Last edited:
- Location
- The Land Northward (Bountiful), Utah
Lectron.
I'll see how I like it tomorrow, but I will say it starts the motor cold much much much easier, like first turn at 30°F on the button.
Slide
I did have to adjust the needle down a full turn to lean it up just off idle.
One thing I'm not impressed with is the machining on the slide and inside of the clamshell. Tooling chatter is pretty visable... To the point that I'm almost ready to pull it apart and polish it for fear of throttle hang.
I'll see how I like it tomorrow, but I will say it starts the motor cold much much much easier, like first turn at 30°F on the button.
Slide
I did have to adjust the needle down a full turn to lean it up just off idle.
One thing I'm not impressed with is the machining on the slide and inside of the clamshell. Tooling chatter is pretty visable... To the point that I'm almost ready to pull it apart and polish it for fear of throttle hang.
- Location
- The Land Northward (Bountiful), Utah
Still loving the bike. I ordered new Flo yellow UFO plastics in October, 2 months later they arrived from Italy and I finally got to put my graphics on.
Tonkaman
Well-Known Member
- Location
- West Jordan
Ooh I love those!
ChestonScout
opinions are like Jeeps..
- Location
- Clinton, Ut
Looks awesome!
Need more reviews of the lectron.
Need more reviews of the lectron.
- Location
- The Land Northward (Bountiful), Utah
Thanks
Hmm Lectron... I'm going to call Monday and maybe order a 5-1 needle and try that before I give up on it. I'm getting used to it but it has a slight delay in power off idle and I probably need to adjust the power jet for up on top. Still very easy to start and very smooth power.
I'm contemplating an RK tech head to bump the compression after trying to chase Fast guys for three weekends in a row.
Looks awesome!
Need more reviews of the lectron.
Hmm Lectron... I'm going to call Monday and maybe order a 5-1 needle and try that before I give up on it. I'm getting used to it but it has a slight delay in power off idle and I probably need to adjust the power jet for up on top. Still very easy to start and very smooth power.
I'm contemplating an RK tech head to bump the compression after trying to chase Fast guys for three weekends in a row.
rholbrook
Well-Known Member
- Location
- Kaysville, Ut
Cant wait for you to review the RK head. Get it ordered. I have the Slavens head and had I seen the RK, I would have purchased it instead
Finally a bike I could ride 5MOH with Stratton on?
https://www.revzilla.com/common-tre...erent-riding-the-ubco-2x2-electric-trail-bike
https://www.revzilla.com/common-tre...erent-riding-the-ubco-2x2-electric-trail-bike
anderson750
I'm working on it Rose
- Location
- Price, Utah
- Location
- The Land Northward (Bountiful), Utah
Ooosh! Sexay!