jsudar

Got bored over the weekend. Drilled some speed holes in the plate mount of the S4Rs. This will help diffuse any high pressure that forms...

Made a little more progress today. I thought I had all my rear suspension shock length and travel measurements nailed down. Then I had...

Yeah, the swing arm from a 2002 Multistrada 620 bolts right in and clears the 1100 exhaust and mostly works with the Hypermotard...

The suspension rocker on the Hyper has slightly different geometry than the Monster. I had my MockShox set up for 330mm length/81mm...

There she is, with suspension at full droop in a poser shot with the MX seat. After spending several evenings in the garage messing...

I highly recommend it. It made things so much easier. I tapped the post that interfaces with the floor jack so I can thread a bolt with...

And just like that, a 2011 1100 Evo jammed into a 2002 Monster 620 frame.

Ducati motors are very rolly poly. I know, because I had one roll away once and break stuff. In order to not damage my precious 1100, I...

This was my truck bed in November 2023 And this my truck bed in November 2024. I got a fever. And the only prescription is more…...

Bought this stuff at the Ford dealer today. Cost me almost $100 for three quarts. Was is worth it? I’ve only driven the car ten...

Just finished up this 24” wheeler for my ten year old. The whole thing is straight gauge aircraft 4130. Even without any butted tubes...

Okay--I'm not saying you're wrong (as my own Miata project would attest). But this raises a question: how much power will be enough...

My Miata experience... a turbo on the Miata engine is plenty of power! https://www.rme4x4.com/threads/miata-talk.57516/

Because I’ve been using this as a commuter and it’s not uncommon for me to spend 2.5 hours a day in it, I did some stereo upgrades. A...

Since the stock trans and rear end can only handle about 250 WHP and I’m not ready to do those swaps yet— I would like to hit about 230...