General Tech Cory's single seat selfish buggy

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
Ive been doing a bunch of little stuff while i wait on a mountain of parts i ordered.

I got the rear end completely finished with seals, and flipped the intake on the motor and routed a where i wanted it.


Facing the diff covers with my high dollar surface grinder.


11165884_854596839223_214303093_n.jpg


They Jewed me out of a sweet sticker to show off my blinging shaft. Im not to happy about it.
CIMG3917.JPG


Im going to clear the diff covers and paint the axles black
CIMG3918.JPG

4"
CIMG3919.JPG
 

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
Running out of space awfully fast. Where is the fuel filler hose going meow?

I have no idea. Its just metal.


Im going to run the stock p pump. I bought and installed a new reservoir for it. (Notice the factory shit grinding marks all over)

IMG_5106.JPG

I made a new idler wheel bracket for the serpetine system to give me more wrap on the alt and PS pump.
IMG_5089.JPG

Stock config.
IMG_5091.JPG

New config.
IMG_5092.JPG

Mounted the battery finally.
IMG_5107.JPG

Picked up a new toy.
IMG_5105.JPG

More full bump poser shots with the blinging pink D lines.
IMG_5094.jpg
 

Attachments

  • IMG_5100.jpg
    IMG_5100.jpg
    1.3 MB · Views: 47

Bart

Registered User
Location
Arm Utah
No build thread but here are a couple of pics.
 

Attachments

  • uroc SLC 104.jpg
    uroc SLC 104.jpg
    45.8 KB · Views: 38
  • uroc SLC 079.jpg
    uroc SLC 079.jpg
    43.1 KB · Views: 36

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
Its been warm so i keep getting distracted.

I mount the trans cooler tonight and fabbed my Tranny/tcase cover plate.

IMG_5109.JPG

IMG_5111.JPG

IMG_5115.JPG

IMG_5114.JPG

I forgot to take a good pick of it.
IMG_5110.JPG
 

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
Got this sucker running yet? What's taking so long!


No. Laziness mostly. I did fabrimicate/mount my steering reservoir this week.


Photo885.jpg

I added some baffles inside. ^> these little ones keep the inlet tube from shooting fluid up where it can touch the air. it forces the fluid toward the outlet.

Photo884.jpg

This baffle keeps outlet full of fluid if the buggy is side ways.
Photo886.jpg

IMG_5283.JPG

IMG_5284.JPG

Im just using a radiator weld in bung and cap for the fill.
IMG_5286.JPG


IMG_5287.JPG


IMG_5289.JPG


I had to track down a fitting to convert the 16MM O ring fitting in the P pump to convert it to JIC -6. I found one thru poly performance. As far as i can tell only PSC makes such an adapter. http://www.polyperformance.com/PSC-16MM-18MM-x-6-JIC-Adapter?quantity=1&multi318=15097&multi=17176
 

Attachments

  • IMG_5285.JPG
    IMG_5285.JPG
    879.7 KB · Views: 14
Top