It totally sucked. it took way too long. i was dreaming up a way to use my 6x79" 3phase belt sander after doing the first one jic i decided to do the second juan.
idk. i know these 05 axles are 71.5" and id like to be a little narrower jaydens buggy.
i had a 1/4" to spare in my press. 👌 
beef cake 
craneaxle.com
I'm running the crane seals that Austin posted
I'm certain a 14b on the coast side is far stronger than a d60 on the drive side. The ring gear is bigger and the pinion is massive compared to the d60 also the 3rd pinion bearing that the 14b has. My biggest reason for all this work is the spool size. I'm running 40 spline inners shafts. We put a 40 spline spool in a 60 in geoffs buggy and the only one we could find was a light weight drag spool. It was only maybe 5/16-3/8 thick where the ring gear bolts. I'm sure he's gonna have rp issues because of the weak spool deflection. The 14b spool is 1.125" thick at the ring gear. (I posted a pic comparing a 35spline 60 spool) There is a reason all the rock bouncer guys run 14b fronts/d60. Those dudes have done enough r&d lol. I've ran a 14b on the coast side in my rear engine buggy for 8 years now and I've really taxed it.
3x9 front and rear
its just a piece of 3" pipe and some 1/4 mild steel plate with 312ss cover pass. i used 309l ss on the axle housing
