- Location
- Grand Junction, CO
Looks like a huge step forward, good to have you back!
The Trailantula
- Thread starter _Auzzy_
- Start date
- Featured
Looks like a huge step forward, good to have you back!
_Auzzy_
Web Wheeling Extraordinaire
- Location
- Richfield Utah
Good to be back man! Excited to get this rolling
_Auzzy_
Web Wheeling Extraordinaire
- Location
- Richfield Utah
Got main structure for the top done tonight, Corys dragon and all of his hard work R&Ding this made easy work of this! Gonna change the front of it to match my likings but the rear was perfect to me.
Here’s mine on the table
And here’s Corys #4 chassis that came back to get the drivetrain mounted in.
Here’s mine on the table
And here’s Corys #4 chassis that came back to get the drivetrain mounted in.
_Auzzy_
Web Wheeling Extraordinaire
- Location
- Richfield Utah
Got the main structure welded out, now to do some re-designing of the headache bars and cut out the lacing pieces then from there it’ll be linking it, front truss, reassemble axles and she will be a roller
_Auzzy_
Web Wheeling Extraordinaire
- Location
- Richfield Utah
She’s getting closer to a roller status lads.
Link tabs with spacer that’s .003 wider than a heim with misalignments
Corys cool little table jig that sets the lowers nice and flat with the belly
And the rear has links. The actual links will be hest treated 2x.25 4130 chromolly and the upper will be chromolly as well. Tomorrow we will get the upper brackets designed and burned in too
Link tabs with spacer that’s .003 wider than a heim with misalignments
Corys cool little table jig that sets the lowers nice and flat with the belly
And the rear has links. The actual links will be hest treated 2x.25 4130 chromolly and the upper will be chromolly as well. Tomorrow we will get the upper brackets designed and burned in too
_Auzzy_
Web Wheeling Extraordinaire
- Location
- Richfield Utah
Got the rear link setup burned in and them reformed the top of the axle truss so it wasn’t so blocky.
- Location
- Price, Utah
This may be a stupid question but I’ll ask it anyway. Why are you running the upper link heirs on the horizontal plane instead of vertical?
- Location
- Richfield, UT.
Easier to mount and they wont care. Uppers should only get loaded in and out really and there is plenty of missalignment in them. Lowers should be mounted conventionally since they see high side loading when smashing boulders.