Search results

He does.

Was yours DIY carl? Or turnkey? Brand? You heard right.:D

Indeed. Its quite precise in raw form. Its the DOM of solid shapes.

Im familiar with this. The colleges torchmate uses CRS and we would give it a good blow down evertime we fired it up. I intend to plumb in a handy air nozzle for dedicated table blow job purposes. Some scotch brite and Wd-40 should keep them nice and shiny (have you seen my 2 year old buggy...

0 Everything is dead square and straight. This nut is is has a hole drilled behind it. It is welded in the center of the table on both sides so i can bolt on a decent wheel and balance the table and move it on the the two wheels and simply unbolt once its moved. Its been nice having...

Cut steel. crs rails drilled Built side by side one leg was but welded out of left over drops to save on material. All thats left over.

Assembled gantry ends Extruded aluminum axis with hardened steel v rail in it. The little trolley has matching v bearing rollers with the bottom two being on a cammed spacer to set the backlash. All these holes are drilled and tapped for 5/16 bolts. This is a transfer punch set for those...

If you go 4x4 go with a 4x8 and only use 4x4 of the materials. The price difference is marginal, and you never know if you will grow.

Here are all the plans and instructions for this Kit>>http://www.chacich.com/MAGNUM%20II/

Both. Not just for the table but for heavy free hand gouging and demolition purposes. I would like to operate this table with more industrial things in mind as those clients are easier to deal with then one off artsy people. I use a 100 amp and 80 amp millers at work regualy and i knew i woulded...

Kit showed up 5/18/2016 steel 5/26/2016 Fist i made me a magnetic breakaway for the machine torch for if/when i crash the machine i don't ruin a expensive torch. The magnetic breakaway precsion plasma sells is listed for 250$. i spent 6$ on mine. 4$ in magnets and 2$ in counter sunk ss screws...

Well after years of dreaming and reading I went ahead and pulled the trigger on DIY plasma table kit. This is all pretty new to me. I operated one when i was in college 6 years ago but have forgot most of it. Building the table is easy enough for me, the overwhelming part is the cad and all the...

Hes in the picture too lol.

This right here. > Thread end:

Lets see some pics, and some one write the report lol. Im too busy at work to.:D

This one ha ha. I was 15 when this was built. I didn't get a 4x4 till i was 18.

And den?

Good deal. See you there.

The minivan or the hooptie? Im unsure based on your username.:D

Whats it going in^?^