Search results

I rode to the gas station in a hoodie and about froze.

Huge pump

Lotsa black boogers angle grinder and flap wheel if you don't have access to a torch : that cast thing is hard to remove.

I basically exploded my shop with a mess to swap my air compressor. I've had this beefy 110v V-twin for 14 years and I thought it was going out. Turns out the belt was loose and it needed a service... It now runs perfectly fine... Shoulda just put it back in... But I thought it was toast and...

Time attack mode. Activate.

I think it's definitely doable. Correct me if I'm wrong but you still had drum rear on the green TJ? Likely the increased volume needed for the larger fronts was not so much that the either end locked dramatically first. I most certainly would look at an adjustable proportioning valve in those...

I think the benefit of going WJ Master instead of ZJ is the WJ twin piston Akebono front brake calipers require more volume than the single piston ZJ front brakes. At one point I had an Excel chart that somebody had done the math to figure out the displacement of each of the common calipers out...

Also a ME school guy, I love the FE analysis! The problem with a d30 is it usually kinks at the center near the diff or (occasionally) between the coil mount and knuckle. Sleeves move the weak point to the diff. The short cast center tubes where the tubes are pressed into is already weak and...

Nate. I'm a low total height + 21'x22' and it's too small. Cubic feet is important.

I'd guess yes because the explorer 8.8 rear.

Kevin I had a 88 FC RX7 and you probably would have fit those things were quite spacious. The guy that had the shop across the way from me had an FD and the interior was smaller. I wished mine was white and had a turbo so I could make believe I was a drift racer speeding down a Touge against...

This thing is a mega stretched quad cab thingy with a camper (with a dually bed). Doing nearly 90 in the mountains. Crazy. (Pretty sure it was leaving XGames in Aspen by our proximity). Sorry for the horrible pics. (I woke my wife so she could photo this).

Much want @ Charcoal Burger in Glenwood Springs.

I saw one at cal ranch in Bountiful yesterday Jack.

Look at the exhaust on this sweet nectar. It's like the diameter of a mëdium pizza.

Weld a set on those ram wheels?

I think that's fine especially since you'll have it at freeway speeds.

Looks good! What's the backlash?

All of it. That thing is so big it has its own gravity. I've done most of those points on the Mormon history travel trail dealeo And the Corvette museum although the factory was closed for C8 production (like it wasn't out yet) while we were there. That's pretty darn fun though! They have their...

So it only ran for 10 minutes before it broke? ;) Stevphen I'm interested to know: was it all boost lag and snap oversteer?