Search results

OK I need some help on a engine swap for my jeep yj, its a 89 and I will want to be able to drive it on the road. My qusetion as I am not to familiar with Utah smog laws is what can I get away with? small block Chevy or will it have to be Mopar from the same year or newer? I thought about a 4.0...

If you know of any shops where I can start let me know there numbers. Thanks

I am going to run a wider tire on these wheels and I want to get more tire seperation. I would rather move the inside wheels in and keep the tires under the fender. I know I can have Stockton wheel make me new wheels but it just seem like there should be a shop around here that can just move the...

Yes this is what I need... I just need to find some one that can do them. Do you know anyone around that can? Oh and the wheels are steel. Thanks

Wheel spacers would move the outside wheel out.. I need to move the inside wheel in one inch towards the center of the truck. Also its a 10 lug pattern and I have not seen any spacers for this. The truck is a 2009 F450 with the dana 110 rear end. Thanks

Hey guys... anybody out there know where I can get some wheels made / modified? I have a F450 and I need two rear wheels with 1" more offset. It looks like you could cut out the centers, turn them around and I would get about one more inch. I am hoping some one fairly local. Thanks

I have done this conversion a couple of times, not too hard. the frames are different but it will work. you need to remove the 2x4 crossmember and the rear radius arm brackets. get the ft spring mount and rear shackle frame mounts off a early 70's 4x4 frame measure and install them on your frame...

Sorry I am in Payson. As far as the 60-14 Axel combo I was thinking about a 9" -44 combo but I have lots of Dana 60 parts. I already have 1410 yokes in my parts supply and a locker for a 14 bolt and posi unit for a 60. I think this jeep will see a lot of time on in the sand and trails I doubt if...

Hey Guys, new here first post. Building My first Jeep but not first 4x4. I am looking for a shop that can narrow a D60 for the ft of my YJ. my plan is to put a d60 in the front and a 14 bolt in the rear. Posi in the Ft and Locker in the rear. I want to go stock width on both and say 35" tires. I...