Search results

I ran a warm compression test a few months ago, it was on the lower end but "OK" per the spec. This is my fear though that the problem isn't as simple as what I've been trying.

I'll look into a catch can setup, thanks. An option like this is getting very tempting.

I also think I'm going to try this: https://cruiser54.com/?p=131 If that doesn't work I'm guessing it's excessive blow by.

Failed way worse this time around :mad: After further research, some say the injectors I have in it are good for the HO 4.0 but for the Renix the Bosch 0280 155 746 are the best/correct; specs are 4 hole, 19.9lb/hr @ 43.5psi. I pulled the injectors last night, new ones are on order. I also...

They are Bosch injector part number 0280 150 943. Renix stock is 19lb/hr at 39psi where these are 19lb/hr at 36psi so they're close (but leaning in the direction of rich), the only real "upgrade" is that these are four hole injectors. I agree though, they may be a cause, I just didn't want to...

My wife and I need to go to Pilot Hill CA in a couple weeks to pick something up, I figured this would be a great excuse to use the truck bed camper for the first time. Below is what I'm thinking; day 1 get to Reno, day 2 go to Pilot Hill and then to Elko, day 3 and shorter drive back home...

Disregard the previous post, I just didn't understand what I was measuring across. Summary of the work the past couple days: Started by pulling the harness apart and checking grounds/crimps, everything looked good, it's at this point I realized my mistake in the question from the previous...

Thanks, I worked on it tonight, pulled the O2 sensor relay and checked it out powered and unpowered and it works as it should, checked the other three while I was there and they're all good. I think I may have found a problem though, hopefully THE problem. Resistance from the harness ground...

Failed emissions again today, I'm about to list this damn thing for 2x what it's worth and just see if it sells. It did improve though, last test their machine couldn't even get a reading for any of these metrics so the exhaust leaks were causing problems (I guess?). This time around here are...

@STAG you're not selling an '89 Wrangler are you?

Took me forever to get a intake/exhaust manifold gasket, the first two shipped to me were bent but was finally able to get one ordered to a local store. Got everything I'll say 80% cleaned up and not greasy and put it back together. There was a small crack in the exhaust manifold so I ground...

Current position. Mole Porter is bomb.

Golly... "Stinger Front Bumper" may be an understatement. I'd be knocking rear windows out of cars daily pulling into parking spots.

New shoes for the budget bass boat. The old wheels had been painted several times and were pretty dinged up; I started to clean them up and then said screw it. One thing I like about this project is that it's small and a lot of the stuff is relatively cheap.

hot daym that's purty

Good feedback, thanks guys. I recently picked up the tork lift fast gun tie downs so loading/unloading should be pretty quick. I've read quite a lot online and most folks seem to recommend having some sort of under floor support that takes ~80% of the weight to save the camper jacks and make...

@crimsonride do you ever offload the camper at a spot while camping? If so, how do you support it? I recently picked up a Palomino 550 soft side and when i go to the lake I'd like to not break down the camper every morning to dump the boat. My thought is if I'm anywhere for a few days and not...

I'm not sure I want it, but I want someone on here to want it. Somebody please buy this: https://cars.ksl.com/listing/9127789 And combine it with this:

@Herzog, curious why you went the crossfire route over the arcdroid? Just wondering what your pros and cons list looked like.

Let's go wheeling! This followed me home today, 2023 Palomino 550 Badlands Edition. The guy bought it brand new off the showroom floor last year, stored it in his shop and never used it once. Unfortunately he got injured and had to get off of it, and I got an awesome deal. Pretty excited to get...