TEAM FRED
Registered User
- Location
- Centerville
I have some 1/8" aluminium kicking around.. Perfect for tops. Around $80 per top depending on size. Let me know what you need and I will shear them to size.
1/8" Aluminium jeep or buggy tops
- Thread starter TEAM FRED
- Start date
ChestonScout
opinions are like Jeeps..
- Location
- Clinton, Ut
How big can you go?
ChestonScout
opinions are like Jeeps..
- Location
- Clinton, Ut
I need roughly 48"x66"
BlueWolfFab
Running Behind
- Location
- Eagle Mountain
Your roof is 5' wide? ^
She's a wide girl since I built it as a "hybrid" exo per se. Technically it's 52" center to center but since it's like a turtle shell I need 55". The original 60" was to make sure I had extra
I'm tempted to redo the top of it but it seems pretty unnecessary at this time. Once I dent some more tubes I'll give it a go.
BlueWolfFab
Running Behind
- Location
- Eagle Mountain
Gotcha, I was gonna say Trates cage was only 47"-48" wide up top ha.
TEAM FRED
Registered User
- Location
- Centerville
Yes I can go up to 60" x 90". Let me know.
Sorry for the delay on reply.
Sorry for the delay on reply.
ChestonScout
opinions are like Jeeps..
- Location
- Clinton, Ut
Nice
May as well make mine 49x67 then. Give me a little wiggle room.
Ill take it for sure
May as well make mine 49x67 then. Give me a little wiggle room.
Ill take it for sure
mombobuggy
Well-Known Member
- Location
- Highland
i would like one 59 1/4 x 79 3/4 if possible.
TEAM FRED
Registered User
- Location
- Centerville
Wow all of these tops are the biggest ones I've seen. Due to waste and size they are all coming out to the same cost. $170 I can do as many as you want.
TEAM FRED
Registered User
- Location
- Centerville
That could be done. I prefer poly cells to aluminum.
ChestonScout
opinions are like Jeeps..
- Location
- Clinton, Ut
Hmmmm
Thats signifigantly higher than a 48"x96" sheet of 1/8" aluminum
Ill have to pass at that price. Thanks tho
Thats signifigantly higher than a 48"x96" sheet of 1/8" aluminum
Ill have to pass at that price. Thanks tho
Last edited:
TEAM FRED
Registered User
- Location
- Centerville
Cheston. I based my price on the 5 x 10 that I bought. They work better for me because most tops are under 5 foot wide and I get 3 or 4 tops from a sheet.