cjncustoms
Well-Known Member
- Location
- West jordan
Well the time has come to sell my jeep to fund my new buggy build. This jeep is amazing and extremely capable. Its pretty much point and shoot. Its long and low and very stable. I've owned it for the last 10 years and have done every bit of work to it myself. Its been completely rewired front to back. Not one piece of factory wiring left in it. I WOULD BE WILLING TO SELL IT WITH OR WITH OUT MOTOR/TRANS/T-CASE TO COME DOWN ON PRICE. This is currently a turn key ready crawler. The specs are as follows:
Titled 1984 Cj-7 w/ fully boxed 87 YJ frame. 117.5" Wheel base. (Waterfall eater!) And an awesome legends class rig for OSRC!!
6.0L LQ4 w/LS1 intake Drive by cable Harness and ecm by 150tunes.com. Ron davis Aluminum radiator.
Built TH400
Atlas 4.3 w/32 spline everything. 1410 yokes f/r. new style case and gears. maybe 8 trips on it.
Front 3 link w/panhard, 14" Fox coilovers 1.25" Heims. lower. 7/8" upper
Rear 4 link with 14" fox air shocks 1.25" Heims lower, 7/8" uppers.
Dana 60 KP front 4.10's welded with Yukon chromoly inners, Bobbly Long joints and alloy usa 35 spline outers with tera flex drive flanges.
Psc double ended ram, reservoir and orbital. Howe Tc pump. Highsteer arms tied into factory steering arms.
14 bolt w/4.10's welded. disc brakes. Ballistic fab diff cover. Rear sway bar.
Custom aluminum dash with autometer gauges and all new switches and wiring. There are no fuses except for fuel injection. Everything else is on circuit breakers.
Has ipod hook up with volume control hooked to amp and 4 speakers. Great stereo for a buggy!
Rear end of jeep has been completely rebuilt with all new sheet metal from doors back. Has 1.25" DOM top rail and 1.5" DOM rear "fenders". (see pics)
Cage built with 1.75" DOM.
Corbeau seats and harnesses.
custom aluminum fuell cell and mount.
38" TSL Sx on 15x8 steel wheels with diy beadlocks. Tread is getting low.
All supsension trusses and brackets and links purchased from Ben Hanks racing.
Would consider partial trade for tig welder, band saw, guns, 17" Beadlocks and 40" Maxxis or bfg tires. Ls motor or other possible buggy parts I might need...
Theres so much more than i can type. This jeep has been my heart and soul for the last 10 years and I hate to see it go but I cant have both. Please contact Calvin @ 1-801-699-9094 with any questions. Will be in St. George Utah over thanksgiving and could make arrangements too check it out if interested. Currently located in West Jordan Utah. $16,000 O.B.O
Titled 1984 Cj-7 w/ fully boxed 87 YJ frame. 117.5" Wheel base. (Waterfall eater!) And an awesome legends class rig for OSRC!!
6.0L LQ4 w/LS1 intake Drive by cable Harness and ecm by 150tunes.com. Ron davis Aluminum radiator.
Built TH400
Atlas 4.3 w/32 spline everything. 1410 yokes f/r. new style case and gears. maybe 8 trips on it.
Front 3 link w/panhard, 14" Fox coilovers 1.25" Heims. lower. 7/8" upper
Rear 4 link with 14" fox air shocks 1.25" Heims lower, 7/8" uppers.
Dana 60 KP front 4.10's welded with Yukon chromoly inners, Bobbly Long joints and alloy usa 35 spline outers with tera flex drive flanges.
Psc double ended ram, reservoir and orbital. Howe Tc pump. Highsteer arms tied into factory steering arms.
14 bolt w/4.10's welded. disc brakes. Ballistic fab diff cover. Rear sway bar.
Custom aluminum dash with autometer gauges and all new switches and wiring. There are no fuses except for fuel injection. Everything else is on circuit breakers.
Has ipod hook up with volume control hooked to amp and 4 speakers. Great stereo for a buggy!
Rear end of jeep has been completely rebuilt with all new sheet metal from doors back. Has 1.25" DOM top rail and 1.5" DOM rear "fenders". (see pics)
Cage built with 1.75" DOM.
Corbeau seats and harnesses.
custom aluminum fuell cell and mount.
38" TSL Sx on 15x8 steel wheels with diy beadlocks. Tread is getting low.
All supsension trusses and brackets and links purchased from Ben Hanks racing.
Would consider partial trade for tig welder, band saw, guns, 17" Beadlocks and 40" Maxxis or bfg tires. Ls motor or other possible buggy parts I might need...
Theres so much more than i can type. This jeep has been my heart and soul for the last 10 years and I hate to see it go but I cant have both. Please contact Calvin @ 1-801-699-9094 with any questions. Will be in St. George Utah over thanksgiving and could make arrangements too check it out if interested. Currently located in West Jordan Utah. $16,000 O.B.O
Last edited:
