1985 CJ 7 / LS

[FF1350]

Hey guys , I'm rebuilding a 1985 Jeep CJ 7 with a Gen 3 LS. I've been working on this project all winter and need some options/opinions for Seats , fender flares, and a roll cage. Are PRP seats worth the money or are there better options? Fender Flares, there aren't a lot of options that I can find. Looking for some ware around 4 inch wide flares. I believe other models can be used but don't know for sure and don't want to cut this body up if I don't have to . For the cage ,I don't have a Tube bender so I've been looking else ware but with little success. Any info to help complete this build would be greatly appreciated. Thanks

 

[skippy]

Hey guys , I'm rebuilding a 1985 Jeep CJ 7 with a Gen 3 LS. I've been working on this project all winter and need some options/opinions for Seats , fender flares, and a roll cage. Are PRP seats worth the money or are there better options? Fender Flares, there aren't a lot of options that I can find. Looking for some ware around 4 inch wide flares. I believe other models can be used but don't know for sure and don't want to cut this body up if I don't have to . For the cage ,I don't have a Tube bender so I've been looking else ware but with little success. Any info to help complete this build would be greatly appreciated. Thanks

I sell a ton of PRP seats, they are usually a 4-6 week build time before they ship, I also sell alot of corbeau seats and they are usually in stock. We also build alot of custom cages and install quite a few cage kits as well. So if you interested shoot me a PM or call the shop 385-695-6836 Agility Customs

 

[Mouse]

I think we need more specs and pictures to properly help you...

 

[FF1350]

Here's some more info, this is just something to have fun with. Not a hard core wheeler I live on the east coast in Virginia Beach, Virginia so Hunting trails ,fishing and driving on the beaches of North Carolina. I had a 1974 CJ5 ,304, 3 speed back in 1980 and it was a blast to own. I had a 4 inch lift on that jeep with 36's and a full cage . I picked this up last summer as a project, it was rough and needed a lot of work. I took it down to the frame, replaced driver and passenger floor pans, rocker panels, windshield frame, sold the 258 inline 6 and the 4 speed , kept the Dana 300 . Installed the 5.3 LS with the 4l60e. It still has the stock axles up front and in the rear ( one piece shafts) and 4:10 gears. Its still spring under with 2.5 inches of lift and 31x15 wheels and tires. I want to go up to 35's when theses need replacing. Hope this helps.

 

[BCGPER]

You might want to look into YJ flares. They will require minor trimming of the front fenders, but I’d imagine your choices would be much greater.

 

[DaveB]

I have some Xenon 5 inch front flares for a CJ, like new condition if those would work. I also put an LS in my 84 CJ8 and have enjoyed it so far.