crimsonride
huh?
- Location
- Murray
- Asking Price
- $13000
- Condition
- Used - Great Condition
Hey guys. I need to sell this jeep for a friend of mine. He has gone "away" for a long time and the federal government won't be allowing him to do any jeeping for about 9 more years.
It's a well built rig, here is what I know of it so far. I believe it was built by a shop in California called WFO concepts or something like that.
Drivetrain:
-TBI 350, painless wiring harness, turbo350 auto trans (I think), Atlas II transfercase. (Unsure on ratio). Onboard aircompressor (YORK)
-Dana 60's front and rear, detroit lockers, unsure on gear ratio, armored diff covers. High steer.
-Leaf sprung over suspension, Shackle reversed, (Not sure on make of springs, I can probably figure that out), disc brakes front/rear.
-Custom fuel cell to clear extended wheelbase
-Full PSC hydraulic assist (Gearbox, pump, cooler and hydraulic cylinder by PSC)
Body/Chasis
-Some kind of custom make rock sliders
-ugly front fenders
-Full roll cage with tire carier/rotopax
-TMR customs front dash
-cheap bucket seats and harnesses.
-Custom center console
-hard and soft doors. 2 Soft tops (I think)
-37"s on black steelies. (Full size spare)
-Full belly up skid plate.
-
This is a really well built turn-key rig. I would hang on to it but I'm full up on jeeps already. Looking for about $13 OBO.
Lots more pictures coming later today.
It's a well built rig, here is what I know of it so far. I believe it was built by a shop in California called WFO concepts or something like that.
Drivetrain:
-TBI 350, painless wiring harness, turbo350 auto trans (I think), Atlas II transfercase. (Unsure on ratio). Onboard aircompressor (YORK)
-Dana 60's front and rear, detroit lockers, unsure on gear ratio, armored diff covers. High steer.
-Leaf sprung over suspension, Shackle reversed, (Not sure on make of springs, I can probably figure that out), disc brakes front/rear.
-Custom fuel cell to clear extended wheelbase
-Full PSC hydraulic assist (Gearbox, pump, cooler and hydraulic cylinder by PSC)
Body/Chasis
-Some kind of custom make rock sliders
-ugly front fenders
-Full roll cage with tire carier/rotopax
-TMR customs front dash
-cheap bucket seats and harnesses.
-Custom center console
-hard and soft doors. 2 Soft tops (I think)
-37"s on black steelies. (Full size spare)
-Full belly up skid plate.
-
This is a really well built turn-key rig. I would hang on to it but I'm full up on jeeps already. Looking for about $13 OBO.
Lots more pictures coming later today.
