TheSpecialist
Active Member
- Location
- West Haven, UT
New price $4500 Cash. West Haven, UT. Pics @ http://s1166.photobucket.com/user/Rosco1974/library/1998 Jeep TJ
Good: 123K (runs well), AX-15, hard top, hard doors, 6” lift (all spring), 5-35” Goodyear MTR’s, slip yolk eliminator, dual cardan driveline, Dana 44 rear end, sway bar disconnects, throttle body spacer, a little DIY flat fender treatment (rolled edge, descent job). I don’t know what ratios (too quick to be stock with 35”, but I have not checked). Clean title. No accident/crawling body damage.
Bad: It has wobble @ speed, so it will need steering work. Front trackbar (welded Z link-would go new for road use) bushings are definitely shot, so this could be a descent portion. I drive it around, but you will not drive it home (plan on that). There is slack in the rear driveline (I have not diagnosed). The body is really straight, but there are a few rust bubbles coming through in the typical Jeep spots (door channel, hinges, etc). All are still flap wheel clean up. Tires are worn, but should pass inspection.
Trade: I need a newer 18ft car hauler (preferably 10K or greater capacity). This is the reason for selling.
This is not a turn-key freeway cruiser.
Good: 123K (runs well), AX-15, hard top, hard doors, 6” lift (all spring), 5-35” Goodyear MTR’s, slip yolk eliminator, dual cardan driveline, Dana 44 rear end, sway bar disconnects, throttle body spacer, a little DIY flat fender treatment (rolled edge, descent job). I don’t know what ratios (too quick to be stock with 35”, but I have not checked). Clean title. No accident/crawling body damage.
Bad: It has wobble @ speed, so it will need steering work. Front trackbar (welded Z link-would go new for road use) bushings are definitely shot, so this could be a descent portion. I drive it around, but you will not drive it home (plan on that). There is slack in the rear driveline (I have not diagnosed). The body is really straight, but there are a few rust bubbles coming through in the typical Jeep spots (door channel, hinges, etc). All are still flap wheel clean up. Tires are worn, but should pass inspection.
Trade: I need a newer 18ft car hauler (preferably 10K or greater capacity). This is the reason for selling.
This is not a turn-key freeway cruiser.
Last edited: