- Location
- Grand Junction, CO
SALE PENDING!!!
Relisting these... I want to build them up, but reality is that they will just sit around.
I have 2 Isuzu 4BD1T's for sale. These are 3.9l turbo diesel 4 cylinder engines, similar to a Cummins 4BT but they aren't as loud, don't shake near as much and are a bit smaller. With some tweaks of the injection pump and the correct turbo, these will make a reliable and driveable 450 ft/lbs of torque and get 25+ MPG. Very neat engines and a little hard to find.
One of them is mostly assembled and complete (including injection pump), but has a hole in the block. The other is torn down and ready for a rebuild and is very clean, but it was missing the injection pump. The crank journals look perfect. Together you can build a complete engine and have spare parts to sell, like the cyl head, turbo's, crank, all the misc parts, etc. I also have 2 factory turbos that appear to be in working order, 2 starters, 1 alternator, etc. Both engines had manual transmissions and come with 2 factory bellhousing adapters and flywheels. I have one decent wiring harness with the assembled engine.
Also included are;
Pics-
The good block, crank, head and cam have been covered in WD40 to keep rust from forming.
Located in Grand Jct, CO
I will NOT ship, buyer picks up only.
Price for everything- $1800, will not separate
I also have a working mid-90's GM 4L80E (w/ torque convertor) and driver-drop NP241 t-case I was going to use with the 4BD1T. I can add them for another $600.
Relisting these... I want to build them up, but reality is that they will just sit around.
I have 2 Isuzu 4BD1T's for sale. These are 3.9l turbo diesel 4 cylinder engines, similar to a Cummins 4BT but they aren't as loud, don't shake near as much and are a bit smaller. With some tweaks of the injection pump and the correct turbo, these will make a reliable and driveable 450 ft/lbs of torque and get 25+ MPG. Very neat engines and a little hard to find.
One of them is mostly assembled and complete (including injection pump), but has a hole in the block. The other is torn down and ready for a rebuild and is very clean, but it was missing the injection pump. The crank journals look perfect. Together you can build a complete engine and have spare parts to sell, like the cyl head, turbo's, crank, all the misc parts, etc. I also have 2 factory turbos that appear to be in working order, 2 starters, 1 alternator, etc. Both engines had manual transmissions and come with 2 factory bellhousing adapters and flywheels. I have one decent wiring harness with the assembled engine.
Also included are;
- Injectors that have been rebuilt by Oregon Injection
- ARP head studs
- Complete set of Crane Cams Z28 valve springs (enough springs for 2 engines)
- NPR intercooler
- New water pump
- New oil filler cap
Pics-
The good block, crank, head and cam have been covered in WD40 to keep rust from forming.
Located in Grand Jct, CO
I will NOT ship, buyer picks up only.
Price for everything- $1800, will not separate
I also have a working mid-90's GM 4L80E (w/ torque convertor) and driver-drop NP241 t-case I was going to use with the 4BD1T. I can add them for another $600.
