For Sale - Firm Price 2014 CSC Rock Buggy

[Duramax529]

I have a brand new rock buggy still being built. It's a custom DOM 1 3/4" tube chassis built By CSC Fab out of GA. Has custom built fuel cell, rear mount radiator, used low mile LT1 fuel injected motor, Turbo 400 transmission and NP 205 transfer case with 1410 yokes. Dana 60 king pin front axle with Artic industries truss, rear 14 bolt with artic industries truss. Disc brakes all 4 corners, stock shafts on both axles rear is welded and front is open. Double triangulated front and rear, 1 1/4" heim joints chromoly, 2" dom 3/8" 4 link bars! Corbeau Baja SS seats, art cart transmission shifter JB Customs twin stick cable shifters, custom steering column, quick disconnect steering wheel, joes racing electrical switch panels. Howell injection complete engine wiring harnes plug and play, Howells performance computer with all deletes for engine, 43" SX super swampers red label tires brand new, MRW custom 17" bead lock, brand new Bilstein 9100 series coil over shocks 17" travel all 4 corners, PAC coil springs. Lokar throttle pedal fire wall mount, wilwood master cylinders 3/4" bore, custom built drive lines with 1410 joints. Everything is brand new condition never used. It does run all it needs to be complete is PSC full Hydro kit, and brake lines! Great deal for half the price!


Asking $26,000 Cash maybe partial trade
Located In: Grand Junction, CO
NICK 970-773-4589

 

[STAG]

Wow that's a smokin deal.

 

[Duramax529]

thanks. spread the word. hate to sell it but need money for medical bills

 

[mombobuggy]

Cool Buggy.

 

[Duramax529]

Top

 

[Duramax529]

Make offer or trade

 

[Duramax529]

How about I just give it away

 

[Toad]

ill take it

 

[Duramax529]

It's a custom tube chassis Built By CSC Fab. Bare chassis is 113" long 52" wide 51" tall. Weighs 600lbs. Lower frame is 1.75 x .188 DOM Tubbing the rest the chassis is 1.5"x.120 wall Dom tubbing.


All new parts:
• chassis
• Chevy Dana 60 king pin axle (stock internals)
• chevy corporate 14 bolt (weld Spyder gears)
• Bilstein 9100 series Rock crawer coil overs 17" travel 2.0 remote res
• 43" Super Swampers SX red labels
• MRW custom 17"x12" steel wheels 2.5" back space
• Weld on bead locks
• NP 205 chevy transfer case
• Jb Customs Twin stick cabel shifters
• Art cart flush mount transmission shifter (reverse gate)
• Reprocess TH400 transmission
• LT1 tuned port injection (35k miles)
• 4 core aluminum radiator with dual 10" electric fans
• all link bars are 2" Dom tubing 3/8" wall
• Ruff stuff chromoly heat treated 1.25" heim joints
• 1410 yokes on both axles and out puts on T-Case
• Joes electrical Switch panels
• Joes battery quick disconnect
• Loakr throttle pedal assembly fire wall mount
• Wilwood Duall master cylinders 3/4" bore floor mount (single pedal)
• Hooker long tube Headers
• Howell performance engine harness and and custom tuned computer
• Artiec Industries axle trusses front and rear with full hydro mount on front
• Corbeau Baja SS seats (black)
• RCI 5 point harness (red latch style)
• custom aluminum 12 gallon fuel cell
• custom fuel pump 150gph
• custom drive lines with 1410 percison u joints (drive line services local shop)
• QTY 12 4" square led light. Rock light series
• Quick disconnect tube adapters (4) to pull engine cradle off.




What Buggy Needs to be finished
• PSC Steering hydro kit!
• Brake lines
• internal axle parts both axles
• Wiring Harness If you want bunch of accerioes (I have a EZ harness)
• Winch
• Stainless steel beaded fuel and coolant lines ( I have high temp nylon hoses on buggy to test fire) you can use those or tap frame rails.
• Gauges to monitor all temps and pressures


All tube work is done chassis is fully welded, all drive train is mounted, seats harness mounted, all axle brackets welded trusses welded mounts welded. Just need to buy remaing parts and install.