4to1 Dana 300 with 2.72 doubler attached

[greenjeep]

I have a Jeep Dana 300 with the Tera low 4to1 kit. It also has the Tera heavy duty output shaft, as well as twin stick setup. It is set up for cable shifters, which means you can mount the shifters anywhere you want. It also has a Northwest Fab Black Box doubler attached to it. This gives you an additional 2.72 gear reduction before the transfer case. This brings the overall transfer case gear reduction to 10.88to1!

This combination is almost identical to an Atlas 4 speed transfer case, but I am selling this for less than half the cost of an Atlas.

Asking $1,500. Located in Moab, Utah, but can help with delivery if necessary.

If you are not familiar with the Black Box, here is some information about it.

http://www.northwestfab.com/NWF-BlackBox-Underdrive_c_7.html

And this is the specific one which I have.

http://www.northwestfab.com/BlackBox-i_p_12.html

 

[Jinx]

That is a cool set up, looks plug and play...

Good luck with the sale.

 

[camicaztoy]

what transmission is this set up to bolt to?

 

[greenjeep]

what transmission is this set up to bolt to?

It currently is hooked up to my 700r4 through an adapter. I also think I have an adapter which would allow it to fit to a 400, although I'm not positive.

Talking to the guys at Northwest Fab, I think the doubler can pretty much bolt up to anything that you can get an adapter for.