Toyota Ahhhh, I'm going crazy!!! I need some Toyota help!!!

[Dylan]

Ok, so i have an 85 toyota pickup. 22-re. the problem I'm having is that when the motor was taken out by the previous owner, he broke all the fuel injector plugs getting everything apart. I've driven it a ton since i put the motor back in with no plug problems. But for some reason now that I'm living in Moab, every time i drive to the store one of the plugs falls off and I loose power. I've tried taping them together, and almost anything else I can think of. Now I'm ready to just put new ends on the plugs. Is that possible? Can i just buy plug ends or do i have to find a whole new wiring harness? I'm going crazy. I'm open to any suggestions.
Thanks for all your help.

 

[billylight]

i have a wire harness but have not really checked to see if its perfect. those factory ends are probably hard to come by

 

[KrazyKarl]

yea, I imagine you could cut the plug ends off another harness and sodder everything back together. Enough guys have swapped in 7mges so i'm sure you wouldn't have any trouble finding a 22re harness that someone has lying around

 

[Dylan]

ya i found some leads here in Moab of some guys that might have some old trucks lying around. I'll see what I can't pick up from them.

 

[Goose]

you could sylicone them together, then when or if you need to unplug clip it & change them then

 

[fireLt.]

Dave's off road has new replacement injector harness ends.

 

[big cherokee]

i have the ends if you need them.


or use super glue i have done that before.

 

[1\4elliptic toy]

I have zip tied them in place, it is "permanant"