Anyone know a place for small spacer lift KJ CRD liberty?

[CRDLIBERTY]

I could do the jeep lift but its been cold lately, im in the process of getting a bunch of rims and tires. I ordered 30x9.50 tire and 15inch steel rims hope they fit keep my fingers crossed. If they do fit then im in need for 1 inch lift maybe a daystar poly spacer. Found a place in PG and the guy was nice but for this rig i want to save money.

 

[Brian P]

If you considered daystar, Why not Mr Gasket 1" rubber spacers? They are about $15 for 2
But I know nothing about Jeep's Good luck

Maybe this is a good opotion...
http://www.performancecenter.com/pr.../0/Daystar/DAYKJ09119BK/JEEP/2005/Liberty/4WD

 

[I Lean]

Teraflex makes a 2" "Budget Boost" for 'em, basically poly coil spacers for the rear and steel strut spacers for the front.

It's not 1", but it's very available.

 

[Milner]

http://www.lostkjs.com
There is a sticky thread there with all your lift options.
O prefer the over the top spacer to the inside the strut spacer, but niether are Ideal....that being said a have a Rusty's 2.5" OTT spacer and rear coild lift to put on our CRD.

But 30x9.50 should fit stock. Depending on the rim a 15 may fit, but I no some don't. Older libbys with drum rear brakes have to have 16 or bigger. (I know you have rear disk crd=05/06)

 

[erocrocks]

liberty....

 

[JL Rockies]

I have All J's "Frankenlift" on my 06 CRD. The have spacer lift options as well.

 

[JL Rockies]

I also put 235/85R16 Goodyear MT-R on the stock 16" wheels.

 

[Maverick]

I also put 235/85R16 Goodyear MT-R on the stock 16" wheels.

That's cool. Would 255/85's fit?

 

[JL Rockies]

That's what I have on in the pic. It's a 2 1/4" suspension lift with trimming of the front air dam to allow for clearance when the wheel is turned.

This picture was taken Saturday, I did Fins n Things Friday and Poison Spider, Golden Spike and Gold Bar Rim Sat. I was invited to go along with the good people of Expedition Vehicle Outfitters out of the SLC.

 

[Maverick]

That's what I have on in the pic. It's a 2 1/4" suspension lift with trimming of the front air dam to allow for clearance when the wheel is turned.

This picture was taken Saturday, I did Fins n Things Friday and Poison Spider, Golden Spike and Gold Bar Rim Sat. I was invited to go along with the good people of Expedition Vehicle Outfitters out of the SLC.

255's eh? Sounds like a fun trip.