Billings Canyon, Grand Junction, CO 3-20-11

wallysheata

Registered User
The Grand Mesa Jeep Club held a meeting for the upcoming Offroad Show in June and a few of us decided to go squeeze in a quick run after the meeting. Jeepdiva & MonsterZ just got back from a week at the Hammers, so they were out, Giterdone had some chores on the farm to attent to, Badbuggy was having brake problems so he just walked, and WardenBF had a whole list if minor issues trying to load the rig up so he too just walked, but Bowtied was up for wheeling especially after picking up a new set of 42" MT/R's :hail: On to the pics, which Carrie took

IMG_6231.jpg

IMG_6233.jpg

IMG_6235.jpg

IMG_6236.jpg

IMG_6238.jpg

IMG_6240.jpg


Look the sticker is still on the tire
IMG_6242.jpg

IMG_6246.jpg

IMG_6248.jpg

IMG_6251.jpg

IMG_6257.jpg

IMG_6259.jpg

IMG_6260.jpg

IMG_6271.jpg

IMG_6272.jpg

IMG_6274.jpg

IMG_6275.jpg

IMG_6277.jpg

IMG_6278.jpg
 

wallysheata

Registered User
IMG_6279.jpg

IMG_6280.jpg

IMG_6281.jpg

IMG_6282.jpg


Then we came across two CJ's one with a cummins 4bt stuck in a bad situation, needing a tug.
IMG_6283.jpg


I made an efforto to go around him and help him out.
IMG_6284.jpg

IMG_6286.jpg


Was not looking like the right line here
IMG_6287.jpg


So i backed up and tried to go a little more driver to keep the passanger from climbing so high and bounde up the pass front to the point it made a very loud BOOM noise out of the front end...you know this is not a good sight
IMG_6290.jpg


Fortunately it was a tera flex hub i installed for EJS that did not like the abuse :tisk: 15 minutes later a drive flange was installed, i got around the CJ and helped him out of a bad spot.
IMG_6293.jpg

IMG_6294.jpg

IMG_6295.jpg

IMG_6296.jpg

IMG_6300.jpg


I was then able to get in position and have him winch of my bumper and get him out
IMG_6302.jpg
 
Top