Cable shifters

[skippy]

Who makes a good cable shifter setup for a reasonable amount of money? I thought about building my own but by the time I buy cables It doesnt seem worth it

 

[ChestonScout]

Ive been using NorthWest fabs tripple stick since 08. its been great!

 

[1993yj]

I have the Novak setup for my T case and it's great.

 

[brandt88]

I also have ran the Northwest cable shifters they work well and are a very complete kit

 

[thenag]

Not sure if my setup will give you any inspiration or not.

I have a np231/d300. the d300 shifters went right through the factory hole.

The np231 is shifted by a small air ram.

post 55 and 56 has some info
http://www.rme4x4.com/showthread.php?83436-Nathan-and-Tanja-s-99-XJ-Build-up/page4

let me know if you want more info, it wasn't exactly cheap, I think I have about $125 or so in the whole setup. (and it obviously requires and air source)

The ram shifts the np231 from 2h to 4l, without any stops in the middle, so I can't put the range box in neutral, it has not been an issue since I can put the other two boxes in neutral.

post #62 has the d300 shifters

post #72 has the switch for the air solenoid.

I don't think I have a picture of the air solenoid.

Nathan