Can anyone tell me what these are called?

[J-mobzz]

They look similar to like what you would use for a TV mount or a bunch of other style mounts I’ve spent like 40 minutes on Google and haven’t found anything. I want to make racks to hang my panniers on the wall in the garage so they don’t have to be a perfect fit just something so I don’t fall off.

 

[Hickey]

They look similar to like what you would use for a TV mount or a bunch of other style mounts I’ve spent like 40 minutes on Google and haven’t found anything. I want to make racks to hang my panniers on the wall in the garage so they don’t have to be a perfect fit just something so I don’t fall off.

View attachment 150041

Oh man, I had to buy those for my Yamaha Stratoliner way back when, but I can't remember what they're called. I'll try a Google image search...

 

[Hickey]

Swing arm spools or Bobbin kits.

Motorcycle Parts CNC Rear Fork Spool Bracket Screw M10 for Yamaha TRX850 TRX 850 1996-1999 1997 1998 https://a.co/d/h39NdVr

 

[Hickey]

These are a little closer, but finding the exact profile might be a bear.

Motorcycle Stand Bobbins CNC 10mm Screws For Kawasaki Ninja 250 2008-2016 | eBay

Complete Fairing Bolt Kit Body Screw Set For Kawasaki Ninja 250R EX250 2008-2012. Motor 10mm LED Turn Signal Lights For Kawasaki NINJA ZX6R 636R 300 EX250 GTR1400. Motorcycle Windshield Bolt Screw For Kawasaki NINJA ZX6R 636R 300 EX250 GTR1400.

www.ebay.com

 

[SnwMnkys]

SW Motech use those buttons on their racks. Is that who makes yours or they factory Suzuki?

This is an adapter kit but would get you the parts look similar.

Ebay

 

[Tonkaman]

Looks like an excuse to a lathe… or a mill… or both… 😁

 

[J-mobzz]

SW Motech use those buttons on their racks. Is that who makes yours or they factory Suzuki?

This is an adapter kit but would get you the parts look similar.

Ebay

They are factory Suzuki. But thanks for the link. Those look like they would work.

 

[J-mobzz]

Looks like an excuse to a lathe… or a mill… or both… 😁

At this point I’m thinking some small washers stacked and a bigger washer in the end should be enough to keep them from falling off a wall in the garage

 

[Spork]

If it's just hanging on the wall it would be easy to 3d print something also.

this actually looks pretty close:

Paddock Stand bobbin M6 by p4nd4x

Designed to use with M6x30 screws, allen head.

www.thingiverse.com

I'll print one and take a pic next to a quarter or something for scale. Looks like 1 hour 28 minutes to print one at 50% infil.

 

[Spork]

50% is probably closer to what you want if you go 3D printed on the link post

 

[Gravy]

SW motech makes OEM stuff for lots of the MFGs. I'll bet if you look hard enough you'll find their mark on those pannier bags.

 

[J-mobzz]

50% is probably closer to what you want if you go 3D printed on the link post
View attachment 150068View attachment 150069

He has yeah I didn’t even think of this!! We have a couple smaller printers I could use! Thanks so much for the idea! Unless you want to make 3 more small ones and sell them to me?

 

[Spork]

If you're somewhere by Saratoga/Lehi I can print them. If you have access to a printer I just did 100% infill and scaled down 50%. The inside hole probably needs to be drilled out to whatever size bolt you're using.

 

[J-mobzz]

If you're somewhere by Saratoga/Lehi I can print them. If you have access to a printer I just did 100% infill and scaled down 50%. The inside hole probably needs to be drilled out to whatever size bolt you're using.

Thanks I’ll give it a shot.