chevy 10 bolt & dana 44 knuckles

spiderman

Amish dude
Location
D.C. Area
Does anyone know if dana 44 steering knuckles will fit on a chevy 10 bolt axle? I know that they use the same ball joints, but I am not sure if they are interchangeable. I want the flat-top knuckles, that is why I am asking.
 

spencurai

Purple Burglar Alarm
Location
WVC,UT
this is good info, I need one for the pass side on my 44s....thanks for the tips american axle gurus...now if you need samurai axle advice just drop me a line.....
 

bobdog

4x4 Addict!
Location
Sandy
Originally posted by spencurai
this is good info, I need one for the pass side on my 44s....thanks for the tips american axle gurus...now if you need samurai axle advice just drop me a line.....

The 10 bolt knuckle will fit your 44 but 10 bolts never came with the flat tops.
 

Caleb

Well-Known Member
Location
Riverton
Originally posted by brian
....I've seen flatops on 10 bolts.......:confused:.......in fact the set I have came from a junk yard 10 bolt.....:confused:

yeah, the burba I got my 14 bolt from had a 10 bolt on it and had flat tops...
 

Caleb

Well-Known Member
Location
Riverton
Originally posted by bobdog
OK if I change the never to rarely would I be correct?

prolly:D:D:D

I really am not too familiar with D44s and 10 bolts so I couldn;t give you an honest answer:p maybe someone else can...
 

95jeepgrndchke

Senior Member
Location
In the ZJ
If your serious enough about wheeling you should know that 10 bolts are junk dont deal with the knuckles just go to Pick and Pull and get a 1 ton 14 bolt full floater! :cool:
 
Top