General Tech Cory's single seat selfish buggy

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
Got some steering stuff today. I made the dash tube out of 2 throw away bends and a small piece of scrap.

CIMG3190.jpg

Orbital mount. .250" flat bar with .120" gussets.
CIMG3186.jpg


CIMG3193.jpg

Front end lacing.
CIMG3191.jpg


CIMG3195.jpg

Trying to figure out what master cylinder I want to run before I make my foot cage. I want to use a production vehicle master cylinder in manual brake form. Any ideas on what make and model/year. I heard old corvettes work good with 1ton front calipers and 3/4ton rear calipers.
 

UFAB

Well-Known Member
Location
Lehi Ut
Stick with a smaller bore if manual no booster.

Anything bigger than 1" will have a longer pedal travel from leverage.

I personally love brake vaccum boosters. These new motors dont die at idle.



Sent from my SPH-L720 using Tapatalk 2
 

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
I picked up another coilover, and some rims to put on the 39.5s I scored. Haven't really built anything on it. Waiting on brake parts and trying to track down driveline parts and a good 5.3.

10384444_662210403867253_3418380462292322607_n.jpg




My lady acts more and more like this is going to be her ride

10474206_662210440533916_2734311397601605327_n.jpg


10481604_662210467200580_7238609010464475019_n.jpg


That's about ride height in the rear and full bump in the front.
10488228_662210350533925_4030350569535306492_n.jpg
 

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
Well its been too damn hot to work on it but I did a little.

I pulled the drive train and sent the tranny to my builder guy. This is my first auto and I are dumb when it comes to them. He was telling me he took a sprag out of 700r4 and he machined down a drum or piston so he could add another clutch and then just the basic shift kit and rebuild. I still need to hunt down a 5.3 and d line parts.
Photo649.jpg

Fabbed the floor skeleton and a sweet aluminum floor pan out of scraps.
Photo646.jpg


Photo647.jpg


Photo648.jpg
 

Attachments

  • Photo645.jpg
    Photo645.jpg
    101.9 KB · Views: 18
Top