Toad
Well-Known Member
- Location
- Millville(logan)
These shafts are new. They are cut to 28.5 inches from the wheel mounting flange to end of the shaft. Have lots of spline to narrow them down. They are triple drilled for 5x4.5,5x5,5x5.5. Screw in wheel studs. The brand is Sierra Gear. I was intstalling these into a Scout Dana 44 but the STUPID scout has a different length shaft from the wheel flange to were the wheel bearing presses onto the shaft so they wont work for me. Already have new set 10 bearings and seals installed.
250 bucks
250 bucks