Dillon's Blown Headgasket 3.0!

Owners Name & City- Dillon Powers Salt Lake City, Utah


Make, Model & Year of Vehicle- 1993 Toyota 4Runner SR5 V6


Engine-3.0 SOHC V6 (3vze)


Transmission-R150F 5Spd (was A340H)


T-Case-Stock 2.28:1 Chain drive Tcase


Axles-85 Toyota front housing with 4:88s Stock 87 Rear housing with 4:88s and a lockrite


Suspension-TG5"HD up front with 2WD chevy 63" springs 4" block


Wheels and Tires-16" black steel!! mismatch-tires!


Winch-NONE


Favorite Trails-Ratllesnake-Constrictor, Forest Lake, Mineral Basin, Mini Moab


Other- on its second set of bar's leaks headgasket fix!

 

[devin95sr5]

Hey can you give any info on your 5speed swap. Iv been looking every where and cant dind anything on it. Thanks.

 

[Dillon.Powers]

yeah its honestly as simple as pulling the auto out and putting in the 5spd. you need the 5 speed cross member you need to cut a bigger hole in the floor bolt on a flywheel instead of the flex plate. get a clutch then i cut a hole in your firewall for the master cylinder and run a clutch line down to the slave cylinder on the trans, pulled my entire dash harness and engine harness off the donor truck and put it all in mine and im also running the 5spd ECU