DOM Needed

[bigwhiteyj]

im down here in price utah. anwhere i can get 3ft of Dom tubing reasonably
priced?

 

[Herzog]

im down here in price utah. anwhere i can get 3ft of Dom tubing reasonably
priced?

I don't know of any shops down in Price that even know what DOM is, let alone get a hold of it. Not sure if that has changed recently... When I lived down there I traveled upstate to get all my tubing.

A couple shops that support RME usually carry DOM or you can order it through them.

 

[bigwhiteyj]

is there some where in slc or provo area that use alot of this stuff that might have a piece they could ship me do u know?....im not familiar yet with rme, what they have or where they are out of.

 

[bigwhiteyj]

is there a decent place up north...spanish to slc that might ship me a piece that you know of?

 

[Chevycrew]

Ill bet mike @ summitmachine.com could ship you a chunk, as well as some other vendors.

 

[spaggyroe]

Ill bet mike @ summitmachine.com could ship you a chunk, as well as some other vendors.

I agree, that's probably your best option.

What size do you need? Maybe someone has a leftover piece in their garage that they'd be willing to ship you.

A third (and somewhat expensive) option would be to buy from polyperformance.
http://www.polyperformance.com/shop/DOM-Tubing-p-1-c-867.html

 

[bigwhiteyj]

i got to have 1" id x 1.5 od (.250 wall)
i looked at summit..i'll have to give them a call..didnt show anything on their site

 

[Corban_White]

im not familiar yet with rme, what they have or where they are out of.

RME is this website........www.RockyMountainExtreme.com

 

[bigwhiteyj]

RME is this website........www.RockyMountainExtreme.com

ok ya got me there lol....i had figured that much out but i had looked at vender stuff and didnt really seem to find anything that applied to what i was looking for..thought maybe they had a seperate store/shop...type thing some where.

 

[scoutabout]

Try Rocklogic 4x4 in West Jordan 801-255-7625

Or SummitMachine.com as previously suggested

 

[78mitsu]

I've got some 1.50 .120 wall how much you need? I'm in wellington.
I've also got some 1.50" .380 wall.

 

[bigwhiteyj]

i believe for the inside od to be 1" its got to be .250 wall
ive got another problem now im going to make a seperate post for also

 

[bigwhiteyj]

I've got some 1.50 .120 wall how much you need? I'm in wellington.
I've also got some 1.50" .380 wall.

may be trying something different..what was the id on these...either .883 or what ever it is...(7/8)?

 

[Chevycrew]

1.50 -.120-.120=1.26
1.50 -.380-.380=0.74

 

[bigwhiteyj]

1.50 -.120-.120=1.26
1.50 -.380-.380=0.74

that makes sense

 

[78mitsu]

Yes, the .380 wall breaks to just about 3/4 inch id. The .120 is too small for doing steering or links. but the .380 is what I use. If you have a dana 44, I have a complete high steer with steering components it's out of 1 3/4 x .240. threaded for 1 ton chevy TREs. It's a waggy width.

 

[bigwhiteyj]

Yes, the .380 wall breaks to just about 3/4 inch id. The .120 is too small for doing steering or links. but the .380 is what I use. If you have a dana 44, I have a complete high steer with steering components it's out of 1 3/4 x .240. threaded for 1 ton chevy TREs. It's a waggy width.

if you got 3ft of that .380 wall (sure hope you do!)...let me know when and where i'll come get it from you. thanks.

 

[78mitsu]

if you pm me an phone number and exactly what measurement you need I'll cut it to length. I paid $11/foot for it so you'd be $35 for the piece.

 

[bigwhiteyj]

hey 78 mitsu. havent heard from you in a while..sent couple pms..dont know if you got them....anyway can i come get that tubing this weekend?...kinda need to get all my stuff to the machinist monday.

 

[78mitsu]

yep, I'll call you today, Work schedule has been crazy this week.