Exhaust shop recommendations - routing around 4 link

[Mulieking1]

I'm about to 4 link my LJ and would like to get some recommendations from the RME crowd on good exhaust shops in the Salt Lake area that would do a nice job routing around the 4link. Thanks for your help.

 

[193kyle]

Ricks Muffler in Orem does great work.

 

[thenag]

There might be better but I have had good luck working with Mr. Muffler on 2100s and west temple. (not Master Muffler) It is at least worth going by and talking to him.

a couple of pics are on post #78
http://www.rme4x4.com/showthread.php?83436-Nathan-and-Tanja-s-99-XJ-Build-up/page6

Nathan

 

[Cascadia]

Ricks does all my exhaust jobs. He even routed my exhaust on my lj which had a triangulated 4 link rear.

 

[Kevin B.]

Ricks Muffler in Orem does great work.

Ricks does all my exhaust jobs. He even routed my exhaust on my lj which had a triangulated 4 link rear.

x3.

 

[RockChucker]

Another vote for ricks. I've had him do 4 different jeeps. All were triangulated

 

[STAG]

Chalk another up for Ricks. Worth the drive. It's not "car show quality" but OEM quality or better.

 

[Jay5.9L]

Kent of Kents Muffler in Sandy has always been great for random jeep needs.

 

[Jinx]

Kent of Kents Muffler in Sandy has always been great for random jeep needs.

X2 for Kent's. Great guy. Great work. Reasonable pricing.

 

[Samersen]

Dan at Utah Valley Tire in downtown SLC. He has done all of mine.

 

[wheelewagon]

Id also like to know on this. I want A custom exhaust built for my 3.6l JK. All the kits you buy are cat back. I'm looking to reroute the entire exhaust and get some better flow. Also I'd like to do some not to inspection friendly things that I don't think normal exhaust shops will do. Like making it look like it runs through the cat but just have A pipe run through it.

 

[Jay5.9L]

Why go around the cat? You are not going to gain that much power, possibly piss off your computer, and ultimately add more pollutants than necessary. If your bent on it, buy a high flow cat so there is no worry about future inspections etc. I'd even sell you my low milage cat off of my 5.9L ZJ. More than enough for a little V6

 

[benjy]

Another vote for ricks. Worth the drive to UT county. They do a lot of custom exhausts for off road rigs and understand what it takes to clear what our suspension systems are capable of.

 

[wheelewagon]

Why go around the cat? You are not going to gain that much power, possibly piss off your computer, and ultimately add more pollutants than necessary. If your bent on it, buy a high flow cat so there is no worry about future inspections etc. I'd even sell you my low milage cat off of my 5.9L ZJ. More than enough for a little V6

Buying A high flow is another option I have been thinking of. My personal experiences with cats just have not been good ones. I'd just rather not deal with one. As far as ozone killing and comp issues, I've also been pondering doing A supercharger kit which would clean up emissions and deal with tuning.

 

[brandonlmb]

I like ray's muffler in bountiful. The owner has a built tj and does great work.

 

[iamsparticus]

it is a bit of a drive for you but Reed Muffler up here has done 7 or so full exhausts for me and does amazing work especially considering all the modified 4x4s i take to him. He sponsors my buggy and did the exahust on that too all around excellent work

 

[benjy]

Reeds Rays and Ricks? Do exhaust guys have to have single syllable R names?

 

[iamsparticus]

of course they do its a requirement when you get into the biz lol

 

[Mulieking1]

Thanks for the recommendations. I'll be checking them out.