• RME Gear & Apparel

FJ-80 Axles and FJ80 HP 5.29 Zip Locker diff

ozzy702

ozzy702

Well-Known Member
Location
Sandy, UT
The axles are located in Willard UT the HP 3rd is in Murray UT.

HP 3rd with 5.29 yukon gears and a yukon zip locker - professionally built, never ran. - $900obo

One Early FJ80 front which is missing the HP diff listed above. $200obo

One Later (bigger rotor) FZJ80 front with E-locker $650obo

One Later model disc braked FZJ80 rear with E-Locker $500obo

I've been holding on to them for over a year, waiting to buy a house so I can throw them under my rig but I've got a baby on the way, the wife needs a car and we're hoping to buy a house in the fall so I need the $$$ more than the cool axles.

PM me with offers, please post up any questions you may have.


Thx, Eric
 
sixstringsteve

sixstringsteve

Well-Known Member
Location
UT
ozzy, your pm box is full. And those prices are stupid cheap. E-locker fj80 front and rear axles for under $1200! Just the front HP elocker third is worth $850
 
ozzy702

ozzy702

Well-Known Member
Location
Sandy, UT
sixstringsteve said:
ozzy, your pm box is full. And those prices are stupid cheap. E-locker fj80 front and rear axles for under $1200! Just the front HP elocker third is worth $850
Click to expand...

I realize the parts are cheap. I'm not looking to make any money off them. I just need $$$, have to have them moved by this weekend and know that most guys on here are just like me, trying to wheel and build rigs on a serious budget. I'm sure in another year or two I'll find a good deal on parts again, what goes around comes around. I'm fairly firm on the prices because I think they're very fair but feel free to email me and convince me otherwise. I just emptied my inbox, sorry guys, I didn't know it was full.

Thanks guys!
 
zukijames

zukijames

Well-Known Member
Location
not moab anymore
planning to pick up

One Later model disc braked FZJ80 rear with E-Locker $500obo
and
One Early FJ80 front which is missing the HP diff listed above. $200obo

on saturday let me know if plans change
 
clfrnacwby

clfrnacwby

Recovery Addict
Location
NV
Wow, that HP 3rd is REALLY tempting. Is it already tapped for an air line? I'm assuming no compressor?
 
ozzy702

ozzy702

Well-Known Member
Location
Sandy, UT
clfrnacwby said:
Wow, that HP 3rd is REALLY tempting. Is it already tapped for an air line? I'm assuming no compressor?
Click to expand...

Yes, already tapped but no compressor. I'm actually loosing a bit of $$$ at $900. This was a professional install by a friend that works for an Idaho 4x4 shop. He's built close to 50 toy 3rds with no problems other than one kid with a VERY heavy foot shearing off a few teeth on a 4cyl diff in the rear. I personally have beat on the 3rd's he built me for the past five years with no problems running 37, 38.5's and now 39's. He sets them up with very tight carrier bearing pre-load and does a few other things that seem to help them last. I won't disclose who he works for, for fear of him getting in trouble since he did it for free after hours (owed me a favor). Feel free to check out the 3rd anytime, I have it here in Sandy at my apt.

To be honest I keep going back and forth on just keeping it and throwing it in the front of my truck. I technically don't need to sell it since I have room for it but right now money is more important than wheeling with those big expenses looming on the horizon.
 
ozzy702

ozzy702

Well-Known Member
Location
Sandy, UT
clfrnacwby said:
Wow, that HP 3rd is REALLY tempting. Is it already tapped for an air line? I'm assuming no compressor?
Click to expand...

Yes, already tapped but no compressor. At $900 I'm not making a dime off the 3rd, just re-cooping what I have spent on it (minus gas money and my time). This was a professional install by a friend that works for an Idaho 4x4 shop. He's built close to 50 toy 3rds with no problems other than one kid with a VERY heavy foot shearing off a few teeth on a 4cyl diff in the rear (he deserved to blow out his rear driving a toyota like that). I personally have beat on the 3rd's he built me for the past five years with no problems running 37, 38.5's and now 39's. He sets them up with very tight carrier bearing pre-load and does a few other things that seem to help them last. I won't disclose who he works for, for fear of him getting in trouble since he did it for free after hours (owed me a favor). Feel free to check out the 3rd anytime, I have it here in Sandy at my apt.

To be honest I keep going back and forth on just keeping it and throwing it in the front of my truck. I technically don't need to sell it since I have room for it but right now money is more important than wheeling with those big expenses looming on the horizon so I figured I'd throw it up here.
 
ozzy702

ozzy702

Well-Known Member
Location
Sandy, UT
I'll be out of town and without cell service and teh interwebs tomorrow night until Friday around 6pm. When I get back into town I'll check this thread, any PM's, texts, etc and then make the appropriate phone calls and texts with the address and a time frame. Looking to move everything sometime around 8:30 or 9am Saturday morning in Willard UT. If you need to get a hold of me leave a text at 208-757-2393, I MAY have intermittent service enough for a text to get through. Thanks guys.
 
zukijames

zukijames

Well-Known Member
Location
not moab anymore
bump for great prices im an idiot and found out at 3 am these will not work for my application so if anyone is intrested in the rear with e locker and the early front with no 3rd its still up for grabs.
 
You must log in or register to reply here.
Top