kowe69
wannabe
- Location
- West Valley, Utah
- Asking Price
- $2200
- Condition
- Used - Great Condition
I have a Front GM Dana 60 kingpin axle for sale. It was removed from a 1986 Chevy 1 ton diesel pickup. It includes…
Stock axle shafts with 35 spline inners
New Detroit Locker
New G2 5.13 ring and pinion gears
New bearings
New high mount steering arm
All parts were installed but never used. This project was taking too long and I now have other ambitions.
Full list of parts for sale…
Front GM Dana 60 kingpin axle $2200
Stock axle shafts with 35 spline inners
New Detroit Locker
New G2 5.13 ring and pinion gears
New bearings
New high mount steering arm
Rear Corporate 14 Bolt Axle
New Detroit Locker
New G2 5.13 ring and pinion gears
New bearings
Artec Industries Modular Truss w/pinion guard and truss bridge
Artec Industries upper and lower link mounts for 1.25” heim joints
TMR “15 Bolt” Shave kit w/diff cover and ring gear machine work to gain 1.75” of additional clearance
Rear disc brake conversion w/new ¾ ton rotors, pads and calipers
NP231/Dana 300 Doubler Transfer Case
JB Conversions rear 32 spline output shaft conversion w/1350 flange
JB Conversions front 32 spline output shaft conversion w/1350 flange
FrogFab NP231/Dana 300 Doubler kit w/clocking ring
Steel twin stick shifter included
Stainless twin stick shifters w/billet aluminum Knobs additional
Four links
Two 43” lower links w/2”OD .25” wall DOM tube and two “New” Midnight 4x4 JMX16T Race series 1.25” heim joints, High misalignment spacers with 3/4” though bolt hole
Two 33” lower links w/2”OD .25” wall DOM tube and two “New” Midnight 4x4 JMX16T Race series 1.25” heim joints, High misalignment spacers with 3/4” though bolt hole
Four Goodyear Wrangler MT/R 40x13.50x17LT tires w/ 14/32” to 19/32” tread
One “new” unused Goodyear Wrangler MT/R 40x13.50x17LT tire w/ 22/32” tread
Four Hummer H2 “take off” wheels w/o center caps
Stock axle shafts with 35 spline inners
New Detroit Locker
New G2 5.13 ring and pinion gears
New bearings
New high mount steering arm
All parts were installed but never used. This project was taking too long and I now have other ambitions.
Full list of parts for sale…
Front GM Dana 60 kingpin axle $2200
Stock axle shafts with 35 spline inners
New Detroit Locker
New G2 5.13 ring and pinion gears
New bearings
New high mount steering arm
Rear Corporate 14 Bolt Axle
New Detroit Locker
New G2 5.13 ring and pinion gears
New bearings
Artec Industries Modular Truss w/pinion guard and truss bridge
Artec Industries upper and lower link mounts for 1.25” heim joints
TMR “15 Bolt” Shave kit w/diff cover and ring gear machine work to gain 1.75” of additional clearance
Rear disc brake conversion w/new ¾ ton rotors, pads and calipers
NP231/Dana 300 Doubler Transfer Case
JB Conversions rear 32 spline output shaft conversion w/1350 flange
JB Conversions front 32 spline output shaft conversion w/1350 flange
FrogFab NP231/Dana 300 Doubler kit w/clocking ring
Steel twin stick shifter included
Stainless twin stick shifters w/billet aluminum Knobs additional
Four links
Two 43” lower links w/2”OD .25” wall DOM tube and two “New” Midnight 4x4 JMX16T Race series 1.25” heim joints, High misalignment spacers with 3/4” though bolt hole
Two 33” lower links w/2”OD .25” wall DOM tube and two “New” Midnight 4x4 JMX16T Race series 1.25” heim joints, High misalignment spacers with 3/4” though bolt hole
Four Goodyear Wrangler MT/R 40x13.50x17LT tires w/ 14/32” to 19/32” tread
One “new” unused Goodyear Wrangler MT/R 40x13.50x17LT tire w/ 22/32” tread
Four Hummer H2 “take off” wheels w/o center caps
