Okay, I'm acquiring the stuff I need to plumb the steering and fuel on the buggy. I have all the AN stuff figured out and then I pull my fuel pump out and it has these ends. :-\ Is there a way to add an AN fitting to this or do I need to run rubber??? I think my E2000 had the lines I could run the Russel adapters on, but this is the E8248.
Fuel pump plumbing
- Thread starter Bart
- Start date
richpblaze
Registered User
- Location
- Stansbury Park, Utah
OH no, your so screwed!!!!
Just kidding, use hose clamps.
Just kidding, use hose clamps.
BCGPER
Starting Another Thread
- Location
- Sunny Arizona
Ditto on you being screwed, but that has nothing to do with your fuel pump....
Like Rich said, a couple hose clamps will work. If you want something a little better, take the pump to Hose Products (or who ever is near Arm), and have them crimp on a hose to your pump. then any fitting you desire on the other end.
Like Rich said, a couple hose clamps will work. If you want something a little better, take the pump to Hose Products (or who ever is near Arm), and have them crimp on a hose to your pump. then any fitting you desire on the other end.
Bucking Bronco
................
- Location
- Layton
I used a earls fitting with a farrel on one end, and a 6an on the other
EDIT: here is a link http://store.summitracing.com/partd...t=EAR-165056ERL&N=700+400041+115&autoview=sku
EDIT: here is a link http://store.summitracing.com/partd...t=EAR-165056ERL&N=700+400041+115&autoview=sku
Last edited: