Full Circle Clips
- Thread starter Shawn
- Start date
- Location
- Bountiful, land of rocks
I went to Eagle with a joint cap and found one that fit well for my 297 joints on my D30.
They had some bigger clips and I bet one that would work. Of course that was a while ago......(4 years or so)
They had some bigger clips and I bet one that would work. Of course that was a while ago......(4 years or so)
Milner
formerly "rckcrlr"
- Location
- Hiding behind a camera
I used to get them at Hendersen, can't find the part number right now, but it was a Dorman product.
Milner
formerly "rckcrlr"
- Location
- Hiding behind a camera
Shawn said:
Nope, too busy, and my cheap ass employer won't pay!!
SL County was nice enough to pay my way last year.
- Location
- Bountiful, land of rocks
Shawn said:
DId you have to 'clearance' the seating area of the joints in the shafts?
- Location
- Bountiful, land of rocks
Shawn said:They were already machined for full circle clips.
CrawlerCraig
Registered User
- Location
- Saratoga Springs Ut.
I bought mine at NAPA. I have a 60 and i kept loosing clips and then the caps would back out so i took a cap into Napa and bought the full circle clips just had to find the right size.....
I had to grind a small amount on both axles so that the full circle would work. It wasn't hard but getting the clips on is a pain........getting them off is even harder! But since that upgrade i havn't lost a cap yet!
I had to grind a small amount on both axles so that the full circle would work. It wasn't hard but getting the clips on is a pain........getting them off is even harder! But since that upgrade i havn't lost a cap yet!
Milner
formerly "rckcrlr"
- Location
- Hiding behind a camera
Clips, smips....3 tack welds and go