For Sale Fully built Dana 60s

[skippy]

I am selling the axles out of my ProMod. You will not find a stronger more capable set of axles.

FRONT AXLE: 63" WMS

High Pinion Teraflex CRD center section
.5" Wall Axle tubes
Chevy Kingpin Inner Cs and Knuckles
Dynatrac 5x5.5 spindles, hubs, and 1/2 ton brake setup
Yukon 5.13 gears
Spartan Locker
Branik Custom4340 35 spline shafts machined for 50+ degrees of steering (stock dana 60 shafts turn 32-35 degrees before binding)
Yukon Super Joints
Yukon 4340 35 spline stub shafts machined for 50 degrees of steering.
Yukon drive flanges.
Setup for a 3 link and Track bar
Custom high steer arms mounting the steering ram behind the axle and everything in dual shear
1.25" .25" tie rod with 3/4" Heims
1350 forged yoke

REAR AXLE: 63" WMS

Low Pinion Front GM dana 60 housing
Dynatrac front spindle mounts
Dynatrac front spindles, hubs and brake setup for 5x5.5
Branik custom 300m double splined 35 spline shafts
Dynatrac Drive flanges
Yukon 5.13 gears
Yukon Zip Locker
Differential is offset to the driver side for maximum clearance
setup for a 3 link
1410 forged yoke


Asking $5900 for the pair but willing to separate, I have WELL over double that invested in them

 

[gijohn40]

will you take my first born in trade? he is great at IT...

 

[skippy]

we can work something out

 

[Bart]

Killer deal.

 

[skippy]

These need to go to a new home, throw me an offer. I would also be willing to swap gears, brackets and whatever else to make them work in your rig.

 

[Bart]

I should talk Eric into buying these.

 

[skippy]

I should talk Eric into buying these.

XJs with 50 degrees of steering are for winners!!!!!

 

[skippy]

Bump. Someone throw me an offer

 

[skippy]

$5900 bucks!!!!

 

[tophermckenzie]

How well would these fit under a 07JKU?

 

[N-Smooth]

very much un-well