• RME Gear & Apparel

General Dirt Bike Questions

anderson750

anderson750

I'm working on it Rose
Location
Price, Utah
If you pull it apart, take out all the jets and soak them in ammonia for 15 minutes and then rinse them well with water. The ammonia will break down any deposits in the jets.
 
sixstringsteve

sixstringsteve

Well-Known Member
Location
UT
Anyone have a hitch-mounted bike carrier they'd like to sell? I foolishly sold mine last year.


Caleb, I see you reviewed a rider cargo one on RMATV a couple years back? Still got it? Any chance you want to sell it?
 
Cascadia

Cascadia

Undecided
Location
Orem, Utah
He could always add us to his racing team if he was a real friend. Then we could pick them up. Caleb, lets start an RME race team. We'll race every weekend to the trail in our trucks. Then enjoy the ride.
 
Rot Box

Rot Box

Diesel and Dust
Supporting Member
Location
Smithfield Utah
What do you guys consider a good price for those hitch mount carriers? I see them on KSL from time to time but $200+ seems steep and the $100 HF one looks cheap.... Anyone here tried making their own?
 
jentzschman

jentzschman

Well-Known Member
Location
Sandy, Utah
Rot Box said:
What do you guys consider a good price for those hitch mount carriers? I see them on KSL from time to time but $200+ seems steep and the $100 HF one looks cheap.... Anyone here tried making their own?
Click to expand...

RMATV has them 200 new so if they are going for 200 on ksl, seems like a better deal to buy one new
 
sixstringsteve

sixstringsteve

Well-Known Member
Location
UT
how do you guys wash your bikes? I've been taught to stay away from pressure washers wherever bearings are concerned. Do you just use a brush and soapy water? or a pressure washer? a hose?

How do you wash your chain?
 
D

Deleted member 12904

Guest
sixstringsteve said:
how do you guys wash your bikes? I've been taught to stay away from pressure washers wherever bearings are concerned. Do you just use a brush and soapy water? or a pressure washer? a hose?

How do you wash your chain?
Click to expand...

I use a pressure washer after i spray it with the cheap purple power stuff from walmart.

Sent from my DROIDX using Tapatalk 2
 
jentzschman

jentzschman

Well-Known Member
Location
Sandy, Utah
I hose mine off then used some simple green and a tooth brush. Then rinse and repeat. If the grim is real bad the manual says some engine degreaser can be used.

My manual says to stay away from pressure washers.
 
Cascadia

Cascadia

Undecided
Location
Orem, Utah
I noticed tonight, and before tonight, just didn't think about it. But when I am decelerating my bike pops from the exhaust. What does that mean?
 
anderson750

anderson750

I'm working on it Rose
Location
Price, Utah
That can be caused by both lean and rich conditions. One of the challenges of jetting is that under many circumstances they behave similarly and you really need to look at how it behaves when it transitions from pilot to needle to main.
 
R

rholbrook

Well-Known Member
Location
Kaysville, Ut
anderson750 said:
That can be caused by both lean and rich conditions. One of the challenges of jetting is that under many circumstances they behave similarly and you really need to look at how it behaves when it transitions from pilot to needle to main.
Click to expand...

Start by turning your air screw 1/4 turn out first to see if it gets better. If it does, continue to go out with it, if not go back the other direction.
 
ChestonScout

ChestonScout

opinions are like Jeeps..
Location
Clinton, Ut
Rot Box said:
What do you guys consider a good price for those hitch mount carriers? I see them on KSL from time to time but $200+ seems steep and the $100 HF one looks cheap.... Anyone here tried making their own?
Click to expand...

im in the process of designing a fancy one.

i bought one off ksl for 75 bucks. it works but ive had to weld up some of it that was just bolted.
 
You must log in or register to reply here.
Top