For Sale Getting out of the dana 44 business. Shafts, gears, rear axle covers.

[kmboren]

Asking Price

$100.00

I have some items for sale since I am
upgrading to full size axles finally.
2 Sets of 4.88 gears one thick and one thin. Thin set has a small chip on the end of one pinion tooth but it's not an issue. Let's say $100 each.


Alloy USA front TJ/LJ rubicon dana 44 alloy shafts. $400. Passenger side is newer than driver side and warranted once. Broken joint stretched the ears. Was replaced.


One dana 44 diff cover. It is 1/2 inch think from trail defense aka dusty sexton. It has the recessed holes so your bolts don't get damaged. $75.


I will also have a yukon zip locker for the 44. It wont be avaiable for a few weeks. $500
Requires the thick gears for rubicon TJ/LJ axles. Should work on front or rear Dana 44.

I also have a rear drum brake dana 44 from a TJ. It is trussed for a trianglated 4 link. I still have the lower brackets and coil buckets. It will Bolt into an XJ. Has a anti wrap bar. Has a yukon Zip locker with G2 alloy shafts and 4.88 gears. $1500. I also have a small compressor which I will sell for $50 with the purchase of loose zip locker or I will include it with asking price of rear axle.

 

[I Lean]

I should probably take that BTF diff cover. Maybe you can send it up with Mbryson's steering stuff?

 

[Pile of parts]

I should probably take that BTF diff cover. Maybe you can send it up with Mbryson's steering stuff?

Ok, I'm curious... Are you back in the Dana 44 business or is the diff cover for the Mbryson clan projects?

 

[mbryson]

Ok, I'm curious... Are you back in the Dana 44 business or is the diff cover for the Mbryson clan projects?

We are sticking to stock covers as far as I'm aware

 

[Troop92]

Two dana 44 HD diff covers. One is 3/8 from blue touch fabrication. $50. The other is 1/2 think from trail defense aka dusty sexton. $75.
View attachment 112254View attachment 112255


Kevin 8015924924.

44HD.... As in ZJ/WJ? I'd be interested.

 

[bryson]

44HD.... As in ZJ/WJ? I'd be interested.

I'm pretty sure these are just heavy duty covers for a normal Dana 44. If you're referring to the aluminum-centered D44A from Grand Cherokees, they're a different animal, and take a different (but similar looking) cover.

 

[I Lean]

Ok, I'm curious... Are you back in the Dana 44 business or is the diff cover for the Mbryson clan projects?

I'm moving toward the D44 business again. I'm just collecting parts for now though...

 

[kmboren]

Just standard 44 covers.

 

[Greg]

I'm moving toward the D44 business again. I'm just collecting parts for now though...

Did you buy a Willys with a round tube frame and a crazy cantilever suspension?

 

[kmboren]

Updated first post with pictures of rear axle.

 

[kmboren]

Bump. Updated first post. Still lots for sale.